Search found 6 matches
- Thu Apr 19, 2012 5:19 pm
- Forum: Late model JD crawler technical support
- Topic: Pull a 350C back to the shop?
- Replies: 0
- Views: 3129
Pull a 350C back to the shop?
Can you pull a 350C with hyd. reverser back to the shop to get her going again? It died at the back of the farm and would like to pull it back to the shop to work on it. Thanks
- Sun Apr 01, 2012 5:35 pm
- Forum: Late model JD crawler technical support
- Topic: Dip stick behind left foot when on JD 350 CB?
- Replies: 2
- Views: 3708
Dip stick behind left foot when on JD 350 CB?
Thanks for all the help on my question on the spring on the track. It turns out some welded on an extra 1 1/2" to the track tentioner piston. Next question I have is what is the dip stick bihind your left rear foot when sitting on the machine rear end or reverser? Also what type of oil do we add to ...
- Fri Mar 16, 2012 1:36 pm
- Forum: Late model JD crawler technical support
- Topic: New track on JD 350 CB How to compress spring?
- Replies: 7
- Views: 8014
- Fri Mar 16, 2012 3:45 am
- Forum: Late model JD crawler technical support
- Topic: New track on JD 350 CB How to compress spring?
- Replies: 7
- Views: 8014
New track on JD 350 CB How to compress spring?
Installed all new rollers and sprocket, now trying to put new chain (rail) on and am unable to compress the spring enough to join the chain. We have all the grease out of the tightener and with the spring out we can connect the chain so we know that the front idler will slide back far enough. Is the...
- Tue Dec 20, 2011 7:32 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 tracks and sprockets
- Replies: 9
- Views: 10113
JD 350 tracks and sprockets
Pins and bushings are wore readly bad on the one side of the machine, and the sprocket isn't the best either. Can you take the track off and give it half a turn and hard weld the sprocket up to get a few more years out of it. Also how do you know witch pin is the (joiner) pin to remove? Only use mac...
- Thu Dec 15, 2011 1:34 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 tracks and sprockets
- Replies: 3
- Views: 9455
JD 350 tracks and sprockets
Will tracks and sprockets fit a 350 off a 450. If not whats the difference. Thanks TR