JDcrawlers Messageboard

Can you pull a 350C with hyd. reverser back to the shop to get her going again? It died at the back of the farm and would like to pull it back to the shop to work on it. Thanks

Thanks for all the help on my question on the spring on the track. It turns out some welded on an extra 1 1/2" to the track tentioner piston. Next question I have is what is the dip stick bihind your left rear foot when sitting on the machine rear end or reverser? Also what type of oil do we add to ...

Any tips for pulling the tightener (greaseable piston) to make sure its clean and all the way in? Also anyone know the original length of the piston I was told some guys use to extend the piston to get a little more life out of a worn track? Thaqnks for the help Troy

Installed all new rollers and sprocket, now trying to put new chain (rail) on and am unable to compress the spring enough to join the chain. We have all the grease out of the tightener and with the spring out we can connect the chain so we know that the front idler will slide back far enough. Is the...

Pins and bushings are wore readly bad on the one side of the machine, and the sprocket isn't the best either. Can you take the track off and give it half a turn and hard weld the sprocket up to get a few more years out of it. Also how do you know witch pin is the (joiner) pin to remove? Only use mac...

Will tracks and sprockets fit a 350 off a 450. If not whats the difference. Thanks TR