JDcrawlers Messageboard

Is there an after market ignition key switch for the 350? Deere's switch is dear (expensive) !

Can anybody out there provide me with pictures of how a log arch bolts up on a 350 with a 3315 winch? Just got the arch that came off of a 450. Not sure how much of a problem it is to put it on a 350. Any help would be appreciated.

Anybody out there know where I can get a log arch to fit on top of my 3315 winch? Gotta be inexpensive.

Does anybody have a source for CHEAP decals for a 350? I'm getting ready to paint and want to trick my machine out. Deere is too expensive. I bought a set from a guy here in Maine and they faded after the first big rain. Any ideas?

Thanks everybody. I scored the bowl on ebay. It should arrive on Saturday. The help is much appreciated.

Looking for a glass sediment bowl for my 350. JD has replaced it with an aluminum one. I keep getting air in my system that is easily detected by checking out the bowl. Any ideas where I can get one?

How do you determine the proper fluid level for 350C power steering?

I just read about your problem with the 3310 manual winch. I have one that is apart and has all of the parts minus the clutch cover.

Great idea. I actually have one of those. If I run the engine and heat up the oil it should be easy. Thanks.

When I get that sucker out I'm going to take a picture and post it. Using a 1/2" breaker bar is out of the question because what was once a square hole is now almost round from previous owners' abuse. You have talked me out of dropping the skid plate, however. Seems lik too much hassle.

I don't have a reverser, and the plug is recessed. A 1/2" ratchet slides in there, but slips because it's pretty well chewed up. I am thinking about taking down the skid plate to give me more room and visibility. How hard is it to take that front skid plate out?

Where is the oil drain plug on my 350 dozer? The parts book shows it on the side of the oil pan, which I can't get to. I see a hole in the belly pan and there is a plug that I can see through that hole. It appears that plug requires a special wrench. I am confused. Any help out there?

According to the book the cable pull with a bare drum is 10,600 lbs. With a full drum it is 6,650 lbs at 2100 rpm. I put it on a late 60's/early 70's 350.

I finally got the 10 series winch on my 350, put 80 wt in the right side, but am curious about the left side. It seems I have the older version of the 10 series winch which the manual doesn't completely cover. It looks like there should be oil (what weight I don't know) in the left side. There is th...

Has anybody got a picture they can post that shows what the top hose attaches to?