Search found 75 matches
- Wed Apr 27, 2022 12:02 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15447
Re: 420C Rubber Tracks?
Lavoy-- do the rubber tracks fit on the stock sprocket and idler for the 420C
- Mon Jun 21, 2021 5:39 am
- Forum: Early model JD crawler technical support
- Topic: John Deere MC track bolts
- Replies: 5
- Views: 4537
Re: John Deere MC track bolts
I used grade five when I needed bolts for my 420C....never had a problem
- Fri Aug 04, 2017 5:39 am
- Forum: Early model JD crawler technical support
- Topic: 40-C hub, shaft and gear needed
- Replies: 2
- Views: 3388
Re: 40-C hub, shaft and gear needed
I:m sure that Lavoy, the administrator here and supplier of many parts can help you
- Wed Jan 13, 2016 7:32 am
- Forum: Show & Tell
- Topic: gearmatic winch roller fairlead build
- Replies: 21
- Views: 22281
your project
nice post and pics but I personally would like to see pics of your ROPS enclosure while you are at it. I need some inspiration!
- Fri Jan 08, 2016 8:01 am
- Forum: Early model JD crawler technical support
- Topic: Another 420 On Craigslist
- Replies: 16
- Views: 17276
- Mon Oct 19, 2015 6:46 am
- Forum: Early model JD crawler technical support
- Topic: 40c
- Replies: 11
- Views: 9564
your 40
check valve clearances maybe one intake is TOO TIGHT
- Mon Jun 01, 2015 7:16 am
- Forum: Early model JD crawler technical support
- Topic: 40C rear PTO thingy
- Replies: 5
- Views: 5701
your thingy
on that type of chain "the master" is just a pin with a small cotter pin....keep looking
- Tue Apr 28, 2015 6:25 am
- Forum: Early model JD crawler technical support
- Topic: Marvel Schebler carb fun (2010 frankenstein crawler)
- Replies: 7
- Views: 6492
your carb
i think it is a venturi..... not a restriction
a true carb part
a true carb part
- Mon Apr 13, 2015 7:05 am
- Forum: Early model JD crawler technical support
- Topic: new 1950 mc
- Replies: 25
- Views: 22614
your clutch
the correct clutch adjusting tool is a must for new clutch work, as they must be adjusted after bolting up to flywheel
Lavoy (Administrator here) has them
Lavoy (Administrator here) has them
- Wed Feb 18, 2015 8:06 am
- Forum: Early model JD crawler technical support
- Topic: Side frame removal?
- Replies: 11
- Views: 11215
your final drive
with my 420 I have never removed side frames for final drive service... just as gregjo said I bent a piece of 3/8 rod into a vee shape with two one inch long stubs bent 90 degrees to fit into top two hole of the final and with proper support from above just side out and turn... be careful they are h...
- Wed Jan 28, 2015 7:37 am
- Forum: Early model JD crawler technical support
- Topic: Looking for first crawler / dozer, wanting something small
- Replies: 16
- Views: 14065
stumps
back hoe is by far easier
- Wed Jan 21, 2015 9:55 am
- Forum: Early model JD crawler technical support
- Topic: Jd 40 won't turn
- Replies: 6
- Views: 7082
your final drive
and don't forget what you said about oil, if the brake is oil soaked ....time for dis assembly
- Sun Jan 11, 2015 8:03 am
- Forum: Early model JD crawler technical support
- Topic: 2010 diesel starter
- Replies: 6
- Views: 6288
your starter
at this point in my life, I always take a photo or two of a project before disassembly................ to help the mind
- Sun Jan 04, 2015 7:11 am
- Forum: Early model JD crawler technical support
- Topic: Jd 40c steering problem
- Replies: 8
- Views: 8206
your dozer
sounds like the right hand final drive needs adjustment what happens when you pull the right hand lever? if it turns right then left hand final is ok.....
- Fri Sep 19, 2014 6:16 am
- Forum: Early model JD crawler technical support
- Topic: 1967 1010 need parts
- Replies: 20
- Views: 17073
your parts
Lavoy.... probably has all the parts you need. he runs this site