http://www.nc4x4.com/forums/showthread.php?t=97473
That might be of some interest (LOADER instead of dozer but close / fixer upper)
Search found 11 matches
- Tue Sep 28, 2010 2:37 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: WTB crawler near Durham? (+ Backhoe)
- Replies: 11
- Views: 9976
- Wed Aug 11, 2010 6:05 am
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
- Wed Aug 11, 2010 6:02 am
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
Gary picked up some new parts ; we are going to switch to the 12 volt neg/ground system. He put on anew rotary-button and disconnected one plug wire to "test" for spark. When he hit the starter, it started on just the one cylinder. So, he connected the other cylinder and drove it over to the car por...
- Tue Aug 10, 2010 1:03 pm
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
Those Champion plugs really complicate the issue- I would replace with Autolite or similar before you go too much further. Really, not hear that before, is there a specific plug? (Professing my ignorance on spark plugs, had no idea this could really be an issue?) Is there a specific "model" of Auto...
- Tue Aug 10, 2010 12:56 pm
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
Ok, I had copied and pasted comments for pop and here is those comments/emails and his replies. (Gary is my uncle / ASE cert master mechanic, etc..) -- Gasser Ignition Problems I once jumped a Ford 8N tractor (6 volt system) with a 12 V car and blew the igntion coil. Hearing that yours got hot makes...
- Tue Aug 10, 2010 11:02 am
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
- Tue Aug 10, 2010 10:53 am
- Forum: Early model JD crawler technical support
- Topic: Will not start now? Ran great for 30-40 minutes
- Replies: 19
- Views: 16928
Will not start now? Ran great for 30-40 minutes
Posting this for my Dad... all thoughts and suggestions are welcome!! -- The dozer ran pretty good for about 30-40 minutes. Then it shut off just like you had turned off an ignition switch. The coil was very hot so we replaced it (it had a 6 volt coil and we replaced it with a 12 volt - but everythi...
- Tue Jul 20, 2010 12:28 pm
- Forum: Show & Tell
- Topic: 1959 JD 440 IC w/ 602 blade
- Replies: 6
- Views: 9099
- Tue Jul 20, 2010 12:20 pm
- Forum: Show & Tell
- Topic: Our new to us, JD 440C
- Replies: 5
- Views: 6007
I wonder how "close" they are, if many of the parts are similar or the same? (That answer is probably here on the site, will look around more) Should be a lot of fun!! Here is another project that dad picked up to help at the farm and you can see how IT turned out!! http://sites.google.com/site/1946...
- Tue Jul 20, 2010 12:04 pm
- Forum: Show & Tell
- Topic: Our new to us, JD 440C
- Replies: 5
- Views: 6007
- Tue Jul 20, 2010 8:59 am
- Forum: Show & Tell
- Topic: Our new to us, JD 440C
- Replies: 5
- Views: 6007
Our new to us, JD 440C
We traveled a couple weekends ago to Bristol, TN area to pick up our JD 440C What we are looking to use it for is some light tree clearing around our 30 acres in Caswell, NC and my 3.5 acres (future homesite!) It was quite the adventure winding out way up the few miles of 421, and then the small cre...