Search found 162 matches
- Tue May 10, 2011 8:41 am
- Forum: Late model JD crawler technical support
- Topic: Chatter Left Steering
- Replies: 14
- Views: 14526
Re: Chatter Left Steering
Just the 450b back togehter new rad water pump etc. Its been sitting for about 18 months (money issues). Started right up moves forward but when Ipulled on the left steering lever it did not turn and make a chatter/grinding noise. Search the board saw some posts about steering not working but nothi...
- Mon May 09, 2011 11:17 am
- Forum: Late model JD crawler technical support
- Topic: fanbelt
- Replies: 10
- Views: 12933
Re: fanbelt
Haven't been on here in a while. Have 450B and needing to replace fanbelt. Have had machine a couple of years now and have done alot to it. As some may recall front got little bit hot so rebuilt everything from front cover forward. Easy to put belt on then. What is easiest way now without taking ha...
- Mon May 02, 2011 12:51 pm
- Forum: Late model JD crawler technical support
- Topic: my new 350 dozer
- Replies: 11
- Views: 12453
This has a three foot long lever mounted to what looks like a big master brake cycl. and 1/4 inch lines that run down to the winch. thanks for the help i will look for model # w hen i get home and try and post some pics That's the 3310 manual winch then. I don't know much about them, but it's cover...
- Mon May 02, 2011 11:27 am
- Forum: Late model JD crawler technical support
- Topic: my new 350 dozer
- Replies: 11
- Views: 12453
Re: my new 350 dozer
Can someone tell me about the winch i have? it has a lever on the left side that the previous owner said was for operateing the winch, but he said the winch has a seal leak and was locked by over tightening the brake and he never use it. does anyone know if parts or seal kits are still available fo...
- Thu Apr 14, 2011 10:02 am
- Forum: Late model JD crawler technical support
- Topic: track master pin
- Replies: 11
- Views: 11913
- Mon Apr 11, 2011 11:36 pm
- Forum: Late model JD crawler technical support
- Topic: Delco one-wire alternator conversion
- Replies: 18
- Views: 29485
I don't recall seeing it, but have you tried using a link belt instead of a rubber one? The link belts and great as they can be made different sizes and adjusted as needed - remove or add links. I'm definitely thinking about it. I did a search on here for how to get the fan belt off and I saw them ...
- Sat Apr 09, 2011 9:11 pm
- Forum: Late model JD crawler technical support
- Topic: Ran my JD410 Backhoe out of fuel. How do I re-prime it?
- Replies: 5
- Views: 10674
Been there, done that. First, there is a bleed screw on the top of your fuel filter assembly that you need to open up. If your machine has the round filters, there are two. One for each filter directly above the filter elements. I think it's a 1/2" hex or 16 point head (probably plastic). Just loose...
- Fri Apr 08, 2011 10:57 pm
- Forum: Late model JD crawler technical support
- Topic: Delco one-wire alternator conversion
- Replies: 18
- Views: 29485
Also, the original pulley is 3.75" in diameter, but the delco pulley is 2.5" so that should be better since it will spin faster (and self-excite) for the low rpm engine. Now just as long as the alternator doesn't stick out too far that I can't get the engine side panel back on (I didn't think about...
- Wed Apr 06, 2011 11:15 pm
- Forum: Late model JD crawler technical support
- Topic: 555A trany parts
- Replies: 18
- Views: 16518
- Wed Apr 06, 2011 9:58 am
- Forum: Late model JD crawler technical support
- Topic: 555A trany parts
- Replies: 18
- Views: 16518
Look to see if your motor has a elevated water pump on it .They sit up fairly high and are a fair size pump that is mounted higher on the engine front plate than a usual 4 cylinder Deere it should have dual thermostats as well .Digitup. robert said in another thread that the engine tag says JD4219T...
- Tue Apr 05, 2011 11:05 pm
- Forum: Late model JD crawler technical support
- Topic: 555A trany parts
- Replies: 18
- Views: 16518
If it really is a 450B dozer with a 555 transmission, I would try first try to evaluate what modifications have been done to make it fit. You may be able to find a good used HLR transmission out of a 450 from a salvage yard cheaper that you can rebuild that 555 transmission. The big question is if i...
- Tue Apr 05, 2011 11:12 am
- Forum: Late model JD crawler technical support
- Topic: missing ID tag
- Replies: 3
- Views: 4097
Re: missing ID tag
The shift gate indicates 3 forward speeds, and 3 revese speeds, with neutral in the middle. Starting to look like a 555A???? I don't know for sure, but I think that's probably the 3-forward,3-reverse powershift transmission that was used on the 550, 555, and 555A. On the other hand, it doesn't look...
- Mon Apr 04, 2011 8:57 am
- Forum: Late model JD crawler technical support
- Topic: Delco one-wire alternator conversion
- Replies: 18
- Views: 29485
If the center hole in the original pulley is to large you should be able to machine a bushing to make it work... I seem to recall that the GM alt has a spacer behind the pulley anyway... If the hole is too small of course you could bore it out... Yeah, the original pulley has a smaller shaft size, ...
- Sun Apr 03, 2011 8:52 pm
- Forum: Late model JD crawler technical support
- Topic: Delco one-wire alternator conversion
- Replies: 18
- Views: 29485
Well, I got my new alternator in the mail. It looks like it will bolt up fine with some spacers, BUT the pulley it came with is for a narrow 1/2" V-belt. I tried swapping the pulley of my old alternator on to it, but it's a different shaft size. I guess I have to track down a new pulley for it now :(
- Wed Mar 30, 2011 10:26 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450 Roller question
- Replies: 5
- Views: 5458