Search found 20 matches

by ld7mile
Fri Dec 30, 2016 2:14 am
Forum: Early model JD crawler technical support
Topic: 1010 John Deere
Replies: 2
Views: 3661

Re: 1010 John Deere

ld7mile wrote:I still need a lower turbulence chamber and chamber locating pin. For a 1963 John Deere 1010 diesel if anyone has one for sale. I have called Lavoy, but he does not have one. Good used parts will be fine.
by ld7mile
Fri Dec 09, 2016 9:27 am
Forum: Early model JD crawler technical support
Topic: 1010 John Deere
Replies: 2
Views: 3661

1010 John Deere

I need a lower turbulence chamber and chamber locating pin. For a 1963 John Deere 1010 diesel. I have called Lavoy, but he does not have one. Good used parts will be fine.
by ld7mile
Wed Nov 28, 2012 7:15 am
Forum: Early model JD crawler technical support
Topic: JD 1010 and JD MC
Replies: 9
Views: 6795

It will vary with brand, but roughly $1000 per side for new sealed interlock chains. Bolt set is about $150, pads if you need them will depend on style and width, but $1000 for the pads is a close guess. Lavoy[/quote. Yes, you are correct the dealer did say 350 chains. Are you saying both sides for...
by ld7mile
Tue Nov 27, 2012 11:27 am
Forum: Early model JD crawler technical support
Topic: JD 1010 and JD MC
Replies: 9
Views: 6795

Re: JD 1010 and JD MC

ld7mile wrote:Which parts JD MC and JD 1010 will interchange?


Hey, thanks for the information. I need a set of chains for my Jd 1010, but if I buy them from John Deere they cost more than I paid for the dozer. I can buy the John Deere MC for a little more than 1 chain will cost.
by ld7mile
Mon Nov 26, 2012 2:10 pm
Forum: Early model JD crawler technical support
Topic: JD 1010 and JD MC
Replies: 9
Views: 6795

JD 1010 and JD MC

Which parts JD MC and JD 1010 will interchange?
by ld7mile
Fri Jul 20, 2012 9:31 am
Forum: Late model JD crawler technical support
Topic: JD 450 2 probllems
Replies: 10
Views: 9112

JD450C

Thanks to everyone who replyed to this post. I went and looked at the machine yesterday evening after I got off work. Each and every one of you are correct. The machine has been abused and not maintaned. He could not get it started, because the starter is loose. The frame is broke under the seat. I ...
by ld7mile
Thu Jul 19, 2012 9:11 am
Forum: Late model JD crawler technical support
Topic: JD 450 2 probllems
Replies: 10
Views: 9112

450C 2 problems

Thank you both for your opinions. Yes, I think the machine may have been treated very ruff, because the owner said the cracks in the side panels were from rocking it with the bucket full of dirt. I wonder if this is a common problem with the 450. Maybe a weak place in the design. Has anyone heard of...
by ld7mile
Wed Jul 18, 2012 9:13 am
Forum: Late model JD crawler technical support
Topic: JD 450 2 probllems
Replies: 10
Views: 9112

JD 450 2 probllems

I have been talking on the phone about buying a JD450C loader. I have not seen it yet. The owner said the engine had been run low on coolent and has a blown head gasket. He said it starts and runs OK now but blows coolent out of radiator. Next he said the side panels are cracked. They support the tr...
by ld7mile
Sat Jul 14, 2012 10:16 pm
Forum: Late model JD crawler technical support
Topic: Worth what
Replies: 1
Views: 3230

Re: Worth what

I have a set of JD450C tracks will not fit my JD1010 so I want to sell them and try to recover some of the money I paid for them. When I say tracks, this means the chains with bushing and pin and pads New cleats welded on the pads. They have 75% wear or more left on the bushing, pins and rails. Wha...
by ld7mile
Fri Jul 13, 2012 9:29 am
Forum: Late model JD crawler technical support
Topic: Worth what
Replies: 1
Views: 3230

Worth what

I have a set of JD450C tracks will not fit my JD1010 so I want to sell them and try to recover some of the money I paid for them. When I say tracks, this means the chains with bushing and pin and pads New cleats welded on the pads. They have 75% wear or more left on the bushing, pins and rails. What...
by ld7mile
Tue Jul 10, 2012 10:17 am
Forum: Late model JD crawler technical support
Topic: JD 450 tracks
Replies: 8
Views: 8485

350 sprockets

Will Jd 350 sprockets bolt to a JD 1010, or do they have to be welded? How much should I have to pay for a new set of 350 chains, and sprockets and where is the best place to buy them?
by ld7mile
Thu May 24, 2012 2:58 pm
Forum: Early model JD crawler technical support
Topic: 1010 dozer tracks
Replies: 10
Views: 11647

JD 1010 tracks

Thank everyone for all the information. The information has given me an idea. I have a good set of JD 450 tracks. What parts would I have to buy and what parts would I have to cut and weld to make the 450 tracks work on the JD 1010? Or is it even possable?
by ld7mile
Wed May 23, 2012 5:42 am
Forum: Early model JD crawler technical support
Topic: 1010 dozer tracks
Replies: 10
Views: 11647

1010 dozer tracks

How can I find out if I have 1010 tracks and sprockets or 350 tracks and sprockets on my JD1010?
by ld7mile
Thu Nov 03, 2011 4:39 am
Forum: Late model JD crawler technical support
Topic: JD 450 tracks
Replies: 8
Views: 8485

JD 450 tracks

Will JD 450 tracks fit a JD 1010?
by ld7mile
Sun Feb 27, 2011 9:38 pm
Forum: Late model JD crawler technical support
Topic: Hello John Deere People, Can you help me? 350 and 1010
Replies: 8
Views: 16193

Thank you Janson Benesch. I had not thought of looking at these points I will surely look at them. My next appointment to look at it will be Wednesday or Thursday. I think by then I should have enough information to make a good decision about the 350 machine. So I would like people to feel free to s...