Search found 225 matches
- Tue Feb 15, 2011 10:33 pm
- Forum: Show & Tell
- Topic: how do I i post a picture
- Replies: 11
- Views: 10910
- Tue Feb 15, 2011 10:13 pm
- Forum: Show & Tell
- Topic: how do I i post a picture
- Replies: 11
- Views: 10910
final removal 1970 350 crawer
It was easy, the only thing i should have done was remove the final pan first. I had to use a comealong chaining it to the back the machine an let the jack off to get the pan off for cleaning an inspection. The pinion has a broke tooth. I got 1 0n order. It took longer to clean then to take apart. h...
- Tue Feb 15, 2011 9:27 pm
- Forum: Late model JD crawler technical support
- Topic: 1970 350 clutches an final
- Replies: 2
- Views: 2958
- Tue Feb 15, 2011 8:52 am
- Forum: Show & Tell
- Topic: how do I i post a picture
- Replies: 11
- Views: 10910
- Mon Feb 14, 2011 11:39 am
- Forum: Late model JD crawler technical support
- Topic: 1970 350 clutches an final
- Replies: 2
- Views: 2958
1970 350 clutches an final
It's going very good and easy. I used the motor cycle jack striped the final down pulled stright out about 4 inches. Bearing was in backwards on final wrong bearing it was not even close to the race , the quil pinion bearing is right. Lots of oil an dirt . I have evey thing on order. I'll work on so...
- Sat Feb 12, 2011 7:13 pm
- Forum: Early model JD crawler technical support
- Topic: The old 40C comes though!
- Replies: 3
- Views: 4251
- Sat Feb 12, 2011 10:14 am
- Forum: Late model JD crawler technical support
- Topic: 450C tracks
- Replies: 11
- Views: 11349
Stan that is so true. I got my1970 350 apart yesterday. Just waiting for parts. I got the track adjuster off tore down , all the rollers , Idlers bearing are excelent Track adjuster is very good evey thing I seen made my day. I hope the inside the final makes another good day. Haveing the right tool...
- Sat Feb 12, 2011 7:44 am
- Forum: Late model JD crawler technical support
- Topic: antifreeze
- Replies: 3
- Views: 4197
- Thu Feb 10, 2011 9:23 pm
- Forum: Late model JD crawler technical support
- Topic: 93A Repair Kit
- Replies: 9
- Views: 8516
If lavoy don't have the. I use crawer Heaven , nice dude to talk with. http://www.crawlerheaven.com/contactus.htm
- Thu Feb 10, 2011 6:55 pm
- Forum: Early model JD crawler technical support
- Topic: mc40
- Replies: 6
- Views: 6144
- Thu Feb 10, 2011 7:39 am
- Forum: Early model JD crawler technical support
- Topic: mc40
- Replies: 6
- Views: 6144
mc40
My old friend has one . His dad bought it new, his mc 40 is being restored for the 3 rd time.Beautiful old machine. I just found out he had one few months back, after I started telling him about my 350 . I'm looking for full set of decales for his mc 40 and some history of the machine. Thank you Ger...
- Wed Feb 09, 2011 9:40 am
- Forum: Late model JD crawler technical support
- Topic: 450C tracks
- Replies: 11
- Views: 11349
- Wed Feb 09, 2011 7:06 am
- Forum: Late model JD crawler technical support
- Topic: 450C tracks
- Replies: 11
- Views: 11349
- Sun Feb 06, 2011 6:53 am
- Forum: Late model JD crawler technical support
- Topic: hydraulic fluid flush advice
- Replies: 8
- Views: 10646
Dig it up, Good idea removeing water from oil. With Stright 350 it's even tougher getting water out of transmission there is no filter. just the drain plug and half inch filler plug.With my Hyd system it has 2 filters and was easy like I posted but when I hooked up the hoe it contaminted the system ...
- Fri Feb 04, 2011 2:40 pm
- Forum: Late model JD crawler technical support
- Topic: hydraulic fluid flush advice
- Replies: 8
- Views: 10646
Dozingdozer. Since the transmission is a different system should have no effect on reverser and hyd system. Your reverser oil is clean. I had trouble with my hyds and changed the oil it was perfect. The reverser an hyd system are different system. It takes nothing to clean the hyd system out 1 oil c...