JDcrawlers Messageboard

raising any of the hyd implements chatter and bounce with no leaking off when crawer is raised off the ground the system holds , but i will check around some more befor i put it back to work. thank you Gerald

thank you lavoy puting oil in her now kinda of though it was pto connection. the trans oil was nasty like the whole machine. gerald

I changed the oil an cleaned the tank an sigh glass for the hyd. The tractor was suttering bad befor i cleaned out the system. the hyd hold good. I opened evey cyl line 1 at a time trying to bleed the air its still suttering. the lever by the transmission fill i think its pto should it be over next ...

On the back of the tranmission there is plate I removed the 3 bolts the plate is stuck on good. My question is there a screen behind that plate? The reverser oil had atf an the filter was a mess. I changed all the oils with Jd 303. Gerald.

I changed all the oils on my crawer, Is there a screen for the transmission? There is a plate on the back of the transmisson would that be it or not it dont look like its evey been off becaused I worked on getting it off. I left my service manual at home. thank you.

My 350 right side was bad I released the adjustment bolt all the way out dumped gallon of minural spirits in the hole and found the brake hung up i freed it up with a cat bar sprayed 5 cans of brake cleaner left it set a month ran the bolt all the way in backed it 2 1/2 out started right up an it sp...

My hyd holds good but the system is shuddering all the time it could have air or the atf some on put in it who know what other oil, any way I pulled the filter cover it was tight on the vent , reached inside the tank is clean . I ordered hyd filter , fuel filter an trans filter from O .Rielly 303 jd...

Kenp I was shorted some pages my book stops at 130-10-22 . Reservoir and filters 190-35-1. I should have assumed the filter was in the hydraulic tank. Its showing a cover . The 190-35-2 Im guessing where the wire mash filter is located. Im thinking operators manual would help with the locations.

Kept I have JD 350 crawer tractor loaders manual SM2063 sestion 10 through 220. I went to hyd sec 190 an reverser secition 130 and periodic lubrication 30. I ordered the manual from JDeerley Thank you .

Im going to change all the oils to JD303. I have looked the service manual over. Where is the hyd oil filter and reverser filter located? I haven't seen my crawer in a month , hopeing to get down south in a couple weeks an try it out again. I have trailer now to transport it to my shop 200 miles nor...

My good long time friend is 64 years old . I told him about my 350 crawer he said i have 1 its mc 40 he ran when he was a kid on his dads farm. I was excited to see his old crawer almost completley restored . it has the original track adjusters some kind of apparatus.

Lakevies thats funny , would be cool if it worked, Im shure the the round stock will work in front of the spring that should not move. It will have to be welded some. I wished the 350 was in my garage I don,t have trailer biig enough to transport it

I need my crawer to do dirt work on my retirement property it needs track seals both sides .I have adjuster seals. I dont have alot of time to do the work on the crawer. I used 6 ton hyd jack to push the track out. I,m thinking of pushing the track out and cutting 1 inch round stock 17 1/2in for the...

lavoy funny about the brake cleance,on my 350 the right side steering clutch brake cover was gone and the hyd oil over filed went inside there. I took 6 cans of brake fluid spayed all around in there. I did pull the drain plug first. It fixed the steering. I need to get the track pin welded befor i ...

i just ordered steering assembley from this place. http://www.brokentractor.com/