Search found 225 matches
- Mon Apr 18, 2016 7:03 am
- Forum: Late model JD crawler technical support
- Topic: 350 lift seals to small JD-AR105381
- Replies: 1
- Views: 2417
- Sun Apr 17, 2016 8:08 pm
- Forum: Late model JD crawler technical support
- Topic: 350 lift seals to small JD-AR105381
- Replies: 1
- Views: 2417
350 lift seals to small JD-AR105381
-I ordered the correct lift seals kit after taking it apart I find the seal are to small and the Wiper seal is to big . I got 3 inch seals but I have four inch bore on my wide track . This is strange and I'm thinking I have 450 lift cylinders . The crawler is 7 ft wide and 7 ft bucket. Was there a u...
- Sat Dec 19, 2015 5:24 pm
- Forum: Late model JD crawler technical support
- Topic: 350 straight wide track question
- Replies: 9
- Views: 9234
- Fri Dec 18, 2015 9:13 am
- Forum: Late model JD crawler technical support
- Topic: 350 straight wide track question
- Replies: 9
- Views: 9234
- Thu Dec 17, 2015 8:23 pm
- Forum: Late model JD crawler technical support
- Topic: 350 injector pump leaking
- Replies: 8
- Views: 7241
Leonard Thank you, if you find any contacts I will interested in them all. I have been using my crawler every day for a scaffolding built off the bucket, I'm building a 20 by 40 lean from 2 7/8 drill steam for my 35 ft toyhauler. It was 22 last night and I didn't get the crawler started till it warm...
- Thu Dec 17, 2015 9:56 am
- Forum: Late model JD crawler technical support
- Topic: 350 injector pump leaking
- Replies: 8
- Views: 7241
It even gets worse. I called discount tractor the discount from them is $ 895 that is sending my pump in to have it rebuilt. They have parts but wont turn loose of them. I see on Ebay ejector kits for my year crawler year is it possible that some of those kits have the same seals? I haven't had any ...
- Sun Dec 13, 2015 7:52 pm
- Forum: Late model JD crawler technical support
- Topic: 350 injector pump leaking
- Replies: 8
- Views: 7241
http://www.yesterdaystractors.com/cgi-b ... &th=293011 this makes since to me .
- Sun Dec 13, 2015 6:42 pm
- Forum: Late model JD crawler technical support
- Topic: 350 injector pump leaking
- Replies: 8
- Views: 7241
- Sun Dec 13, 2015 12:13 am
- Forum: Late model JD crawler technical support
- Topic: 350 injector pump leaking
- Replies: 8
- Views: 7241
350 injector pump leaking
I have roosam-aster pump 1348832 CBC331 serial number 6AL2500 its leaking diesel from throttle control cap. How much skill and work is involved to stop the leak? I have installed a ball valve at the primer pump to shut the fuel off it has gotten really bad and leaks all the time . I have not seen an...
- Tue Dec 01, 2015 10:29 am
- Forum: Late model JD crawler technical support
- Topic: 350 straight wide track question
- Replies: 9
- Views: 9234
- Mon Nov 30, 2015 12:45 am
- Forum: Late model JD crawler technical support
- Topic: 350 straight wide track question
- Replies: 9
- Views: 9234
350 straight wide track question
I bought a 1970 crawler loader few years back that has been pretty good. It had new wide tracks when I looked at it . The owner was in the process of cutting them back to the slot . that being said is there any difference in the frame of a wide track and standard track 350 ? I think the bucket is wi...
- Wed Jun 24, 2015 3:24 pm
- Forum: Late model JD crawler technical support
- Topic: final drive gear 350 stright
- Replies: 2
- Views: 3286
I looked at the bull gear and found the gear sliding on the splined shaft. I thank the previous owners for got to put a washer in. I left it to run that way. I don't have the tools to fix it or wait for seals . It turns like a top. thank you Levoy I bought the clutches 4 years ago and they look very...
- Mon Jun 22, 2015 6:50 am
- Forum: Late model JD crawler technical support
- Topic: final drive gear 350 stright
- Replies: 2
- Views: 3286
final drive gear 350 stright
The final drive gear on my 350 has a lot of movement enough where its rubbing a 2 inch grove making metal in it the pan . The seals where not leaking when I took a part . It was doing that 3 years ago when I rebuilt the clutches and replaced the pinon gear. should I shim the pan ?
- Sun Jun 21, 2015 9:23 pm
- Forum: Late model JD crawler technical support
- Topic: 350 pilot bearing
- Replies: 5
- Views: 5248
I have every thing cleaned up and ready to assembly but the bull gear is really sloppy rubbing the oil pan there was lot of metal flakes where the gear is rubbing a 2 inch area in the bottom of the pan . It was that way 3 years ago when I rebuilt the steering and installed a used pinon. What could b...
- Sat Jun 20, 2015 2:21 pm
- Forum: Late model JD crawler technical support
- Topic: 350 pilot bearing
- Replies: 5
- Views: 5248