Search found 225 matches

by gerald
Mon Apr 18, 2016 7:03 am
Forum: Late model JD crawler technical support
Topic: 350 lift seals to small JD-AR105381
Replies: 1
Views: 2398

Here is what happened the seal kit I ordered is for a 350 Dozer . The new seal for a 350 crawler loader boom lift I hope is AR-105387 it has the 4 inch bore.What a fiasco. It nice to brake out 3/4 impact for the 1 an 13/16 nut on the rod end is very tight
by gerald
Sun Apr 17, 2016 8:08 pm
Forum: Late model JD crawler technical support
Topic: 350 lift seals to small JD-AR105381
Replies: 1
Views: 2398

350 lift seals to small JD-AR105381

-I ordered the correct lift seals kit after taking it apart I find the seal are to small and the Wiper seal is to big . I got 3 inch seals but I have four inch bore on my wide track . This is strange and I'm thinking I have 450 lift cylinders . The crawler is 7 ft wide and 7 ft bucket. Was there a u...
by gerald
Sat Dec 19, 2015 5:24 pm
Forum: Late model JD crawler technical support
Topic: 350 straight wide track question
Replies: 9
Views: 9159

I have tracks that look like new and I can tell you with the 7 ft wide tracks leaves a big mess behind it. I'm amazed at how responsive the machine is. I have a small case back hoe with a 12 inch bucket that replaced the monster 93 A , im trying to get 500 dollars off craigslist i,n N M.
by gerald
Fri Dec 18, 2015 9:13 am
Forum: Late model JD crawler technical support
Topic: 350 straight wide track question
Replies: 9
Views: 9159

I measured the out side track and its 7 ft wide with the tracks ends cut off, the bucket is also 7 ft. There is a 350 C just up the road it looks small compared to my older 350. I'm thinking there was a conversion kit installed because the undercarriage is in excellent condition.
by gerald
Thu Dec 17, 2015 8:23 pm
Forum: Late model JD crawler technical support
Topic: 350 injector pump leaking
Replies: 8
Views: 7179

Leonard Thank you, if you find any contacts I will interested in them all. I have been using my crawler every day for a scaffolding built off the bucket, I'm building a 20 by 40 lean from 2 7/8 drill steam for my 35 ft toyhauler. It was 22 last night and I didn't get the crawler started till it warm...
by gerald
Thu Dec 17, 2015 9:56 am
Forum: Late model JD crawler technical support
Topic: 350 injector pump leaking
Replies: 8
Views: 7179

It even gets worse. I called discount tractor the discount from them is $ 895 that is sending my pump in to have it rebuilt. They have parts but wont turn loose of them. I see on Ebay ejector kits for my year crawler year is it possible that some of those kits have the same seals? I haven't had any ...
by gerald
Sun Dec 13, 2015 7:52 pm
Forum: Late model JD crawler technical support
Topic: 350 injector pump leaking
Replies: 8
Views: 7179

by gerald
Sun Dec 13, 2015 6:42 pm
Forum: Late model JD crawler technical support
Topic: 350 injector pump leaking
Replies: 8
Views: 7179

Thank you Leonard. I have googled my injector pump and haven't found the rebuild kit. My services manual isn't that much help with parts.
by gerald
Sun Dec 13, 2015 12:13 am
Forum: Late model JD crawler technical support
Topic: 350 injector pump leaking
Replies: 8
Views: 7179

350 injector pump leaking

I have roosam-aster pump 1348832 CBC331 serial number 6AL2500 its leaking diesel from throttle control cap. How much skill and work is involved to stop the leak? I have installed a ball valve at the primer pump to shut the fuel off it has gotten really bad and leaks all the time . I have not seen an...
by gerald
Tue Dec 01, 2015 10:29 am
Forum: Late model JD crawler technical support
Topic: 350 straight wide track question
Replies: 9
Views: 9159

Thank you for the answer. The reason for the question I had a guy looking at the 93A back hoe . The guy said it was a wide track factory with a larger bucked . When I first seen the machine there was only inches between the machine and track.
by gerald
Mon Nov 30, 2015 12:45 am
Forum: Late model JD crawler technical support
Topic: 350 straight wide track question
Replies: 9
Views: 9159

350 straight wide track question

I bought a 1970 crawler loader few years back that has been pretty good. It had new wide tracks when I looked at it . The owner was in the process of cutting them back to the slot . that being said is there any difference in the frame of a wide track and standard track 350 ? I think the bucket is wi...
by gerald
Wed Jun 24, 2015 3:24 pm
Forum: Late model JD crawler technical support
Topic: final drive gear 350 stright
Replies: 2
Views: 3264

I looked at the bull gear and found the gear sliding on the splined shaft. I thank the previous owners for got to put a washer in. I left it to run that way. I don't have the tools to fix it or wait for seals . It turns like a top. thank you Levoy I bought the clutches 4 years ago and they look very...
by gerald
Mon Jun 22, 2015 6:50 am
Forum: Late model JD crawler technical support
Topic: final drive gear 350 stright
Replies: 2
Views: 3264

final drive gear 350 stright

The final drive gear on my 350 has a lot of movement enough where its rubbing a 2 inch grove making metal in it the pan . The seals where not leaking when I took a part . It was doing that 3 years ago when I rebuilt the clutches and replaced the pinon gear. should I shim the pan ?
by gerald
Sun Jun 21, 2015 9:23 pm
Forum: Late model JD crawler technical support
Topic: 350 pilot bearing
Replies: 5
Views: 5211

I have every thing cleaned up and ready to assembly but the bull gear is really sloppy rubbing the oil pan there was lot of metal flakes where the gear is rubbing a 2 inch area in the bottom of the pan . It was that way 3 years ago when I rebuilt the steering and installed a used pinon. What could b...
by gerald
Sat Jun 20, 2015 2:21 pm
Forum: Late model JD crawler technical support
Topic: 350 pilot bearing
Replies: 5
Views: 5211

Jt I walked in to local auto parts with the old 8502 bearing the guy came back quick with national 202 ffb that looked to be the same bearing. Right about the clutch being rusty with a lot of dust.