Search found 3 matches

by boothj
Wed Sep 22, 2010 9:08 pm
Forum: Early model JD crawler technical support
Topic: 1010 Crawler wont start
Replies: 5
Views: 5351

1010 Crawler wont start

I checked the plugs a couple of days later after trying to start the engine again. They appeared dry and brown. Eventually I did notice that I had flooded the engine as I could see gas dripping from the large tube exiting the rear of the carb. (not sure exactly what that is?) I will try your suggest...
by boothj
Wed Sep 22, 2010 5:50 pm
Forum: Early model JD crawler technical support
Topic: hydraulic track adjuster repair jd 1010 crawler
Replies: 6
Views: 11616

Track Adjuster Removal

I just replaced the track adjuster on my 1010. Didn't have to remove the track or front idler. Just removed the 4 bolts attaching the adjuster to the front idler and used a hydraulic jack to compress the track adjuster completely. I suggest removing the grease fitting to allow this to happen. In my ...
by boothj
Wed Sep 22, 2010 5:40 pm
Forum: Early model JD crawler technical support
Topic: 1010 Crawler wont start
Replies: 5
Views: 5351

1010 Crawler wont start

:( Looking for some help to solve a problem. I was running my 1010 for about an hour, no problem. I shut off the engine after letting it idle for a minute or so and when I went to restart it, it won't fire. The engine cranks, there's lots of gas and there appeared to be a spark from the plugs. Not s...