Search found 43 matches
- Fri Jan 28, 2022 3:57 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch
- Replies: 3
- Views: 4580
Re: Gearmatic 8A Winch
Can I ask where you found the 8A manual ? I’ve found model 19 but yet to find 8A.
- Fri Jan 07, 2022 8:28 am
- Forum: Early model JD crawler technical support
- Topic: 40C All fuel running on 75% diesel
- Replies: 19
- Views: 11326
Re: 40C All fuel running on 75% diesel
The manifolds are not available easily and are extremely Hard to come by in decent condition . I’m going to experiment with normal manifold vs correct all fuel manifold and test incoming air temps to actually see what difference it makes . The carb is also jetted differently for the heavier fuel and...
- Fri Dec 31, 2021 1:50 pm
- Forum: Early model JD crawler technical support
- Topic: 40C All fuel running on 75% diesel
- Replies: 19
- Views: 11326
Re: 40C All fuel running on 75% diesel
I don’t think Deere offered all fuel by the time 440’s were offered?
- Thu Dec 30, 2021 2:24 pm
- Forum: Early model JD crawler technical support
- Topic: 40C All fuel running on 75% diesel
- Replies: 19
- Views: 11326
Re: 40C All fuel running on 75% diesel
Yeah the other 25% is gas. It will most definitely run on gas% however the purpose of all fuel was to burn less gas and more what they called tractor fuel in the day which to best guess was similar to a gas/kerosene/diesel type mixture . This is why there are two tanks , you must start on regular ga...
- Thu Dec 30, 2021 12:16 pm
- Forum: Early model JD crawler technical support
- Topic: 40C All fuel running on 75% diesel
- Replies: 19
- Views: 11326
- Sat Jan 09, 2021 7:05 pm
- Forum: Early model JD crawler technical support
- Topic: M / 40 muffler outlet OD
- Replies: 1
- Views: 2460
M / 40 muffler outlet OD
Lavoy where did you get muffler for that MC Which has orchard Exhaust JD downturn elbo M1196T? See here’s the problem The outlet OD on that muffler is 1” 9/16 which allows the M1196t to slip on it . I just got a muffler from Steiner (stainless) and the outlet OD is 1 5/8 and the M1196T won’t slip on...
- Tue Dec 29, 2020 2:42 pm
- Forum: Early model JD crawler technical support
- Topic: Best quality points/condenser
- Replies: 3
- Views: 3611
Re: Best quality points/condenser
Was able to track down blue streak points # DR2227P
And blue streak condenser # DR60. Not positive there absolute
Best, but there sure better than the junk that was in tune up kit
And blue streak condenser # DR60. Not positive there absolute
Best, but there sure better than the junk that was in tune up kit
- Tue Dec 29, 2020 11:01 am
- Forum: Early model JD crawler technical support
- Topic: Best quality points/condenser
- Replies: 3
- Views: 3611
Best quality points/condenser
Wondering if anyone has part# or recommendation for best quality points and condenser available for Mc/40 Delco Remy
Distributor ? So far this tune up kit I got from John brillion company contains a piece of garbage set of points.
Distributor ? So far this tune up kit I got from John brillion company contains a piece of garbage set of points.
- Fri Dec 25, 2020 4:12 pm
- Forum: Early model JD crawler technical support
- Topic: 53 40c colour
- Replies: 8
- Views: 6930
Re: 53 40c colour
Good idea , however 2 cylinder told me it could be 8 months to year or more to get a serial number document back due to China virus backlog
- Thu Dec 24, 2020 4:28 pm
- Forum: Early model JD crawler technical support
- Topic: 53 40c colour
- Replies: 8
- Views: 6930
Re: 53 40c colour
So does this mean either color would be considered accurate in terms of a true to original restoration ?
- Wed Dec 23, 2020 7:44 am
- Forum: Early model JD crawler technical support
- Topic: 53 40c colour
- Replies: 8
- Views: 6930
Re: 53 40c colour
So is what you're saying, all 40C's were painted industrial yellow but the ones headed for AG were then painted green?
- Sun Dec 13, 2020 10:20 pm
- Forum: Show & Tell
- Topic: Test pic MC
- Replies: 12
- Views: 20031
- Sun Dec 13, 2020 6:13 pm
- Forum: Show & Tell
- Topic: Test pic MC
- Replies: 12
- Views: 20031
Re: Test pic MC
Well at least what I believed to be true based on what I saw is actually 100% verifiable by the man that did it . Very good to know . Did this fella pass away ? That’s the only thing I neglected to get answered ? Oh one other thing , what was on carrier when you had it ? Unfortunately I got an empty...
- Sun Dec 13, 2020 5:27 pm
- Forum: Show & Tell
- Topic: Test pic MC
- Replies: 12
- Views: 20031
Re: Test pic MC
its a stellar one ! but did you do it for the owner or did you sell it to him once completed ?
- Sun Dec 13, 2020 2:45 pm
- Forum: Show & Tell
- Topic: Test pic MC
- Replies: 12
- Views: 20031
Re: Test pic MC
I’d go check right now but too miserable outside to attempt it.
Who did restoration though ?
https://www.dropbox.com/s/abn61aszzosf0 ... M.jpg?dl=0
Is that your signature stamp ?
Who did restoration though ?
https://www.dropbox.com/s/abn61aszzosf0 ... M.jpg?dl=0
Is that your signature stamp ?