Search found 23 matches
- Thu Feb 16, 2012 10:05 pm
- Forum: Early model JD crawler technical support
- Topic: 420c lister diesel conversion
- Replies: 3
- Views: 4352
420c lister diesel conversion
i just finished machining my flywheel adapter and bellhousing for the TS3 lister. did a dry fit tonite and everything is center. going to poster some pictures if anyone is interested.
- Sat Aug 13, 2011 10:13 pm
- Forum: Early model JD crawler technical support
- Topic: lister ts3 conversion 420c
- Replies: 2
- Views: 3203
lister ts3 conversion 420c
i scrounged up a petter ts3 3 cylinder air cooled pushing 34.5hp at 2500. measured everything up and flywheel mods should be straight forward. got to widen the flanges on my skid-plate for the fan housing tho. what do you guys think about 2500rpm? thats 75ft ibs torque too final drives should be abl...
- Wed Jul 27, 2011 4:15 pm
- Forum: Early model JD crawler technical support
- Topic: carb kit for 420c
- Replies: 1
- Views: 2232
carb kit for 420c
hello lavoy do you have a carb kit in stock 4 my 420?
- Wed Jul 06, 2011 4:10 pm
- Forum: Early model JD crawler technical support
- Topic: marvel shebler for 420c
- Replies: 1
- Views: 2714
marvel shebler for 420c
lavoy , just wanted to check on the price of a complete carburator for a 420? thanks
- Fri Jun 10, 2011 4:55 pm
- Forum: Early model JD crawler technical support
- Topic: 420c... broke throttle shaft
- Replies: 5
- Views: 4554
420c throttle shaft
anyone know the exact hp and torque of the johnny popper 2 cylinder?
- Thu Jun 09, 2011 5:36 pm
- Forum: Early model JD crawler technical support
- Topic: 420c... broke throttle shaft
- Replies: 5
- Views: 4554
420c... broke throttle shaft
well my throttle shaft broke across the butterfly , so i took a shaft out of an old 40 carb the only difference is the little lever on the end was on th wrong side. so i changed the lever around set my load and adjusted my idle but now i can keep her from backfiring and over reving? ever since i ran...
- Sun May 01, 2011 3:05 pm
- Forum: Early model JD crawler technical support
- Topic: load adjusting needle for 2 cylinder gas
- Replies: 4
- Views: 4457
load adjusting needle for 2 cylinder gas
lavoy , would you happen to have a load needle for the updraft carb on the 2cyl? mine is cracked and looks like it was welded (like everything else on my crawler) i found a carb up here in labrador but the needle was robbed out of it. thanks
- Thu Mar 31, 2011 5:33 pm
- Forum: Early model JD crawler technical support
- Topic: head gasket?
- Replies: 3
- Views: 3969
head gasket?
ran the 420 hot the other day (pin hole in rad) and by the time i shut her down i noticed alot of blow-by coming out the fill pipe. also had oil runnin out the distributor cap. maybe cooked head gasket? i aint getting compression in the rad tho.
- Tue Feb 15, 2011 5:21 pm
- Forum: Early model JD crawler technical support
- Topic: 420c front idler out of adjustment??
- Replies: 1
- Views: 2455
420c front idler out of adjustment??
my tracks need to be tightened up allittle i know my sprokets are worn and my chain pins needs rotating but my adjuster rods seem to be at the end of there adjustment? the thread is right at the end of the outer nut on the front side of my main idlers? think its time for new chains/sprockets/and idl...
- Sat Jan 15, 2011 10:44 pm
- Forum: Early model JD crawler technical support
- Topic: 420 loader questions
- Replies: 19
- Views: 15965
420 loader
put the bucket of your hoe under the loader bucket and just take the weight off the hoist cylinders cut a spruce long enogh to stand under the bucket pop both pins out of the hoist cylinders then back up and push the spruce over with your hoe ( from a distance) and let the boom just drop.. just make...
- Sun Jan 09, 2011 6:25 pm
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9051
brake lever
ok did you try and penetrating fluid spray around the shaft? must be rusted on
- Sun Jan 09, 2011 6:06 pm
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9051
stuck brake lever
i have a similar problem with my 420 on frosty mornings. i usually pull my steering levers back and forth before i puts her in gear but the brake band lever freezes up sometimes and it'll stick on. but i know it can be a pain in the ass. they usually free up on there own but one time i had to pull t...
- Thu Jan 06, 2011 6:48 pm
- Forum: Early model JD crawler technical support
- Topic: more 420c questions
- Replies: 4
- Views: 4448
more 420c questions
need to set the record straight with some friends. i have 420c serial # 110449 and her blade push arms are mounted on the outside of her track frames not inside... and the hoist cylinders stroke out to drop the blade not to lift it. this is not original for this year 420c is it? lavoy can probably t...
- Thu Jan 06, 2011 6:27 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 197044
my crawler
420c with carco winch woods rig
- Wed Jan 05, 2011 6:20 pm
- Forum: Early model JD crawler technical support
- Topic: waterpump pulley problem
- Replies: 2
- Views: 3079
waterpump pulley
yeah ive owned a bunch of continental 4 bangers that had two piece sheave like this but were spring loaded not screw type like this. i have the official 420 shop manual for my machine but it don't show a good description of the procedure. im a bit eliterit aswell haha