Nice looking loader. Did paint job on mine then I removed blade and put a bucket on my machine and that is when the problems started. Where are you in Ontario? I am in London. Nice to have members from here.
Yellow Machine
Search found 30 matches
- Mon Jan 16, 2012 8:13 pm
- Forum: Show & Tell
- Topic: restoration of my 440ic
- Replies: 3
- Views: 5812
- Sat Nov 26, 2011 8:57 am
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
- Fri Nov 25, 2011 9:29 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
- Fri Nov 25, 2011 5:16 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
I am adding some additional info to my previous post. Since I am new to all this and this is a new machine to me any suggestions to my derailing problem would be appreciated. The derailing before and now has only happened on the right side so far and always with a loaded bucket of a 831 loader. Left...
- Fri Nov 18, 2011 4:55 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
- Thu Nov 17, 2011 9:53 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
Thanks Tigerhaze. I am not sure what you mean bt 2 or 4 bolt but if you are talking about the pad bolt pattern it is 4. You were dead on about load and turning it was just after a backup then going forward. I do know no roller had any broken flanges but what do you mean about flat spot? I thought th...
- Thu Nov 17, 2011 9:25 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
- Thu Nov 17, 2011 8:01 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
Thanks for your info. It derailed under a full load. I tightened the tracks to spec from manual with rail above upper idler. My friend machined a new upper idler to specs from the manual. The bottom rollers are hitting the pin bosses but I was thinking this was because of the worn rails. I checked t...
- Thu Nov 17, 2011 6:58 pm
- Forum: Early model JD crawler technical support
- Topic: Track thrown
- Replies: 17
- Views: 14590
Track thrown
Since I have put a loader on my 440ICD I have been throwing tracks. New bushings, pins and rear sprockets last winter. All of the idlers good no play as far as the bushings are concerned. The chains are quite worn but can not find better ones. I have weights on rear. I have been told that it is a wo...
- Fri Jan 14, 2011 11:40 am
- Forum: Off-topic discussions
- Topic: anybody snowbirds???
- Replies: 9
- Views: 9037
- Thu Jan 13, 2011 3:30 pm
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9054
- Tue Jan 11, 2011 4:16 pm
- Forum: Early model JD crawler technical support
- Topic: Hydraulic oil filter
- Replies: 0
- Views: 2066
Hydraulic oil filter
The reservoir tank on my 440 is part # AT 11430 T type. It has no filter. Has anyone ever put an external cartridge type filter on one? Just trying to play it safe.
Ted
Ted
- Mon Jan 10, 2011 12:13 pm
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9054
- Mon Jan 10, 2011 7:38 am
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9054
- Sun Jan 09, 2011 9:19 pm
- Forum: Early model JD crawler technical support
- Topic: More 440 ICD rebuilding questions
- Replies: 11
- Views: 9054