Search found 323 matches

by CatD8RII
Thu Mar 09, 2023 1:39 pm
Forum: Late model JD crawler technical support
Topic: 350C - 3152D - Not starting
Replies: 8
Views: 3577

Re: 350C - 3152D - Not starting

On the older machines, the manual is a combined book with the engine info in it.

TM1115 for the 350-C should cover most everything you need. It details liner removal and installation, as well as the rotating group and cylinder head.
by CatD8RII
Thu Jan 12, 2023 11:40 am
Forum: Late model JD crawler technical support
Topic: Identify this crawler
Replies: 9
Views: 3018

Re: Identify this crawler

There's a few other quick ways to identify a C machine from a B or straight besides the anchor bolts. The track frame support for the rear crossbar is fabricated versus cast, and runs parallel vertically with the track frame. Later C dozers used a shortened track frame similar to the loader, and hav...
by CatD8RII
Thu Dec 08, 2022 11:34 am
Forum: Late model JD crawler technical support
Topic: Batteries
Replies: 7
Views: 4244

Re: Batteries

I know this is a Deere forum, but we've had extraordinary success with CAT brand batteries at work. Both my 350's have Cats in them, as well as most of our trucks. They last, they don't leak, and they have excellent CCA ratings. Best part is, there is no core charge, (at least at the dealers around ...
by CatD8RII
Wed Sep 01, 2021 7:48 am
Forum: Late model JD crawler technical support
Topic: JD350C clutch seals? (Thrust Washers - Solved)
Replies: 10
Views: 7988

Re: JD350C clutch seals? (Thrust Washers - Solved)

Good info in here.

Just an FYI, the thrust washers are listed online, but not illustrated. They're grouped under the bearing housings.

My parts book mentions them as well, and even says they're not illustrated.

Glad they fixed it somewhere along the line, it was confusing at best.
by CatD8RII
Sat Dec 12, 2020 4:40 pm
Forum: Late model JD crawler technical support
Topic: 350C Reverser - Clutch Pressure Regulating Valve
Replies: 11
Views: 7240

Re: 350C Reverser - Clutch Pressure Regulating Valve

Great post, thanks for the detail! Leonard mentioned some good checks, and I think you should also attempt to speed up your rate of shift screw, and pay attention to the wear items he mentioned on the accumulator, and especially the clutch valve, those yokes tend to wear where they contact the pin o...
by CatD8RII
Thu Nov 26, 2020 7:44 pm
Forum: Late model JD crawler technical support
Topic: 350C Clutch Control Valve Adjustment
Replies: 5
Views: 6062

Re: 350C Clutch Control Valve Adjustment

Continuing on this thread will make it easier to follow IMO. Get a gauge on your reverser clutch pressures, that will really dictate which direction to go afterwards. You don't need the transmission in gear to check them. Just remember, that oil is what feeds the steering clutches, so low pressure i...
by CatD8RII
Thu Nov 26, 2020 7:35 pm
Forum: Late model JD crawler technical support
Topic: Straight 350 track frame
Replies: 4
Views: 3918

Re: Straight 350 track frame

Where do you plan to put your sprocket shield and rock guard if the track frame is cut?
by CatD8RII
Tue Oct 27, 2020 3:35 am
Forum: Late model JD crawler technical support
Topic: 350C Brake self adjustment assembly?
Replies: 14
Views: 7077

Re: 350C Brake self adjustment assembly?

Yes, just like Leonard said, the clip goes on the bottom, and will attempt to compensate for wear by tightening the nut. When you rotate the nut you should feel and hear a click as the tab engages with the nut. Don't feel too bad Leonard, I had to go re-read the FAQ a couple of times before getting ...
by CatD8RII
Sun Oct 25, 2020 4:02 pm
Forum: Late model JD crawler technical support
Topic: 350C Brake self adjustment assembly?
Replies: 14
Views: 7077

Re: 350C Brake self adjustment assembly?

Hi guys, sorry I'm a little late, this pic should show the other c-clip Leonard mentioned.


Image
by CatD8RII
Sun Oct 25, 2020 3:54 pm
Forum: Show & Tell
Topic: First One! My 350C
Replies: 7
Views: 12048

Re: First One! My 350C

Welcome to the addiction known as owning a crawler.
Agree with everyone about some more traction for hills and ice.
Also noticed your pre-cleaner bowl and cap are missing, if you're keeping it outside make sure to keep that covered or your air filter is open to getting wet.
by CatD8RII
Mon Jan 13, 2020 11:40 am
Forum: Late model JD crawler technical support
Topic: What is in a JD350 fuel tank
Replies: 5
Views: 3956

Re: What is in a JD350 fuel tank

Good pics Stan! Also note that somewhere (350B?) along the line they also added an outlet screen. It threads into the pipe nipple that leads to the shut off valve, only way to clean it is to drain the tank. Another less important item is they added the lockable cap too (or at least the arm for a pad...
by CatD8RII
Tue Dec 24, 2019 7:34 am
Forum: Late model JD crawler technical support
Topic: 350CE Alternate Serial Number Locations
Replies: 5
Views: 4801

Re: 350CE Alternate Serial Number Locations

The serial number should be stamped on the right rear on top of the transmission case. There are two sets of numbers on top, one is the pinion depth center line measurement, the other is the last 6 digits of the machine serial number. Probably have to scrape some paint off to uncover it. Some batter...
by CatD8RII
Mon Nov 25, 2019 11:00 am
Forum: Late model JD crawler technical support
Topic: 350B reverser removal from rear
Replies: 4
Views: 3736

Re: 350B reverser removal from rear

It's much easier to remove the reverser out the front, assuming you are starting with a complete machine. That's the way it is designed to come out. As others have said, the engine has no mounts of it's own, it hangs on the front of the reverser, so there would be nothing supporting it and the radia...
by CatD8RII
Sat Sep 28, 2019 11:27 am
Forum: Late model JD crawler technical support
Topic: JD 350c crawler steering problem
Replies: 14
Views: 9795

Re: JD 350c crawler steering problem

No worries Jim, it's what we're all here for.
Andrew, there is a FAQ on how to post to the site, we have our own server. Lavoy can help get you set up.
by CatD8RII
Sat Sep 28, 2019 10:31 am
Forum: Late model JD crawler technical support
Topic: 1988 350d dozer
Replies: 2
Views: 2717

Re: 1988 350d dozer

Can't remember the exact amount, (it's in the manual) but they are all a common sump, or 1 capacity.
You can speed the process up by using the bung plugs on the clutch housings, but the level is checked via the transmission dipstick.