Search found 14 matches

by skymoco
Mon Nov 13, 2017 5:14 pm
Forum: Off-topic discussions
Topic: Posts for Pic Server requests and comments
Replies: 16
Views: 15360

Re: Posts for Pic Server requests and comments

How do we get our username/password added to the pic server?
by skymoco
Mon Nov 13, 2017 5:03 pm
Forum: Early model JD crawler technical support
Topic: Indexing Integral MC Cylinder
Replies: 5
Views: 4941

Re: Indexing Integral MC Cylinder

That was it. Just slightly up from level did the trick.
by skymoco
Mon Aug 07, 2017 1:42 pm
Forum: Early model JD crawler technical support
Topic: Indexing Integral MC Cylinder
Replies: 5
Views: 4941

Re: Indexing Integral MC Cylinder

I'm also thinking that if you draw a line though the lift shaft bar pointing forward (towards the end with the four bolts), the travel has to be between the top and bottom of the cylinder ends. I have the MC manual and I don't see that anywhere. I guess I need the manual for the integral cylinder on...
by skymoco
Sun Aug 06, 2017 6:46 pm
Forum: Early model JD crawler technical support
Topic: Indexing Integral MC Cylinder
Replies: 5
Views: 4941

Indexing Integral MC Cylinder

I decided to rebuild both my integral cylinders and now it's been months since I took them apart and I forgot how I can index them. In the past it's been one at a time but now I am at a bit of a loss.

Anyone point me in the right direction so to speak.

Kevin
by skymoco
Thu Mar 01, 2012 7:40 pm
Forum: Early model JD crawler technical support
Topic: 420c ripper attachment
Replies: 3
Views: 4295

Pictures would be great. I'd love to buy it from you but I suspect that shipping would be many times the cost of the parts.
by skymoco
Fri Feb 24, 2012 10:01 am
Forum: Early model JD crawler technical support
Topic: 420c ripper attachment
Replies: 3
Views: 4295

420c ripper attachment

I have a 420c with the model 90 loader and a couple parts from the ripper attachment. Does anyone have some pictures of one mounted on the crawler. I need to build the arms and some other parts (I don't know what I all missing yet) and I would like to make it appear original at least.
by skymoco
Thu Mar 17, 2011 9:58 pm
Forum: Early model JD crawler technical support
Topic: 420C Zenith Carb Kit
Replies: 14
Views: 13336

On a related note

Now that I cannot just buy carb dipping stuff, what's the best way to get this carb all cleaned up, brushes and tiny drill bits and lots of elbow grease?
by skymoco
Thu Mar 17, 2011 3:27 pm
Forum: Early model JD crawler technical support
Topic: 420C Zenith Carb Kit
Replies: 14
Views: 13336

I ordered the napa echlin 2-1569 kit, which I guess is the parts kit for a number of these Zenith carbs so if it works. I'll let you all know.
by skymoco
Wed Mar 16, 2011 9:21 pm
Forum: Early model JD crawler technical support
Topic: 420C Zenith Carb Kit
Replies: 14
Views: 13336

Zenith Carb Picture

I ordered the carb kit that Ralph talked about. I hope its the right one, I'll know in a few days. In the meantime, here is a photo of what I got...

Image
by skymoco
Tue Mar 15, 2011 6:01 pm
Forum: Early model JD crawler technical support
Topic: 420C Zenith Carb Kit
Replies: 14
Views: 13336

420C Zenith Carb Kit

So I didn't bother to check what kind of carb was on my 420c before I took it apart so the kit for a marvel carb doesn't work. Duh. I looked around the internet and I don't see anyone with a carb kit for the Zenith that's on my crawler (well, on my bench now). I am not sure what the model number is ...
by skymoco
Fri Dec 24, 2010 2:14 pm
Forum: Early model JD crawler technical support
Topic: 420C Speedo/Tach
Replies: 23
Views: 17626

Well, put my name on it. :)
by skymoco
Fri Dec 24, 2010 11:33 am
Forum: Early model JD crawler technical support
Topic: 420C Speedo/Tach
Replies: 23
Views: 17626

I agree with it's usefulness (or lack thereof) but I have the tach and this big hole in the dash.... And if I am gonna install it, I want it to work.

Are you sure you don't have a tach drive around there Lavoy?
by skymoco
Fri Dec 24, 2010 4:29 am
Forum: Early model JD crawler technical support
Topic: 420C Speedo/Tach
Replies: 23
Views: 17626

420C Speedo/Tach

Since my 420 has street tracks and there's snow on the ground I figured I would pull it into the shop for a little TLC. I've had this tach for a 420c sitting around a long time and I have a couple questions for you all. First, where does the drive cable go on the engine. I've looked all over and I c...
by skymoco
Mon Dec 20, 2010 10:30 am
Forum: Lavoy's Little Shop O' Deeres
Topic: Depth shoe for tool carrier dozer blade
Replies: 2
Views: 3399

Depth Shoe

I have a depth shoe that's not mounted right now. If your still interested I could try and find it under all the snow and take some photo's and measurements. I'm missing the handle and some of the other brackets so you could help me out with what those look like and we both come out ahead.

-Kevin