Search found 55 matches
- Fri Oct 01, 2021 5:59 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Combined Sump
- Replies: 1
- Views: 3372
450C Combined Sump
Hi all, So I have put ALL new clutches in my 450C and what a job. It was obvious that this was tore into before and had not been put together quite right to combine the final sumps. There were a few little ring groves but nothing terrible so I had someone just touch them with a lathe and they turned...
- Fri Sep 18, 2020 3:25 pm
- Forum: Late model JD crawler technical support
- Topic: 450C HLR Pressure
- Replies: 3
- Views: 2819
Re: 450C HLR Pressure
Thanks for the reply. I guess my question would be what is possible to make the pressure drop in gear? I would think even if the HLR discs were worn it would not cause a drop. Is there a hydraulic line inside trans that could cause this OR is something in the valve body itself causing the process to...
- Thu Sep 17, 2020 5:45 pm
- Forum: Late model JD crawler technical support
- Topic: Engine removal 450C
- Replies: 2
- Views: 3052
Re: Engine removal 450C
Pulling the pins and hoses should be it but it is extremally heavy so dont get a toe in the way. Remove the nose housing and I kept the rad on. I unbolt the bell housing and it should start to slide out. I actually did mine by myself. It sucks but that should tell you how easy it is.
- Thu Sep 17, 2020 2:48 pm
- Forum: Late model JD crawler technical support
- Topic: 450C HLR Pressure
- Replies: 3
- Views: 2819
450C HLR Pressure
Hi all, I need a little input from the pro's. I have just gotten my stuff back together, new main clutch, cleaned and de-glazed rear steering clutches, etc and I was setting my HLR pressure. At around 1800rpm I seem to have around 160ish psi which seems good but when I go into gear my pressure drops...
- Fri May 08, 2020 1:52 pm
- Forum: Late model JD crawler technical support
- Topic: 450C intermittent track power
- Replies: 7
- Views: 5528
Re: 450C intermittent track power
Is this a 450B or C??
- Mon May 04, 2020 7:59 pm
- Forum: Late model JD crawler technical support
- Topic: 450C intermittent track power
- Replies: 7
- Views: 5528
Re: 450C intermittent track power
Hi Jack, I just watched a documentary on the real Jack the ripper (NOT PRETTY) :lol: Even the smartest nut jobs mess up in the end. Last week I just tore down both sides of my 450C and replaced the bands and looked at my clutches. I originally started this project because of the same scenario you ju...
- Mon May 04, 2020 7:37 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Back Hoe Attachment Mount
- Replies: 1
- Views: 2332
450C Back Hoe Attachment Mount
Hi All, Looking for an idea to re-tap the lower mount bolt holes that mounts the backhoe attachment plate on the rear of the tractor. On one side the mounts pulled away and pulled the bolts with it. The last 1/4 of the threads are still there (inner most part) but rest is wallowed out. The holes are...
- Mon May 04, 2020 7:03 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Brake Band Inspection
- Replies: 5
- Views: 3995
Re: 450C Brake Band Inspection
I just replaced both of mine. Found one side way gone and grinding metal. These adjustments are really time consuming and you need 2 people. When you pull the top plate off you will need to remove the brake adjuster then roll the liner out to see the actual pad.
Good luck
Good luck
- Sun May 03, 2020 10:25 am
- Forum: Late model JD crawler technical support
- Topic: Looking for 450 tool tray pictures or measurements
- Replies: 103
- Views: 73220
Re: Looking for 450 tool tray pictures or measurements
Hi all,
Believe it or not I am now in the middle of rebuilding my battery box on my 450C and had a question, 1-does anyone have a pic they would share of the actual battery plate they sit in?? 2-AL do you have anymore trays and hold downs??
Believe it or not I am now in the middle of rebuilding my battery box on my 450C and had a question, 1-does anyone have a pic they would share of the actual battery plate they sit in?? 2-AL do you have anymore trays and hold downs??
- Thu Apr 09, 2020 7:16 pm
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Re: Another 450C Steering Clutches
I was going to post some pics for you guys but I can not for the life of me figure out how to do it unless I am not allowed but it shows a pic attachment. Any ideas?
- Thu Apr 09, 2020 6:53 pm
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Re: Another 450C Steering Clutches
Any discount if i purchase 2??
Do you have 4 of those seals??
Do you have 4 of those seals??
- Thu Apr 09, 2020 9:33 am
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Re: Another 450C Steering Clutches
I also might have made a mistake by putting this blog in late mods and I apologize if so. I have no problem with it being moved.
Lavoy, do you sell any other items for this 450?? like R39322 for example??
Lavoy, do you sell any other items for this 450?? like R39322 for example??
- Thu Apr 09, 2020 8:24 am
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Re: Another 450C Steering Clutches
Thanks Lavoy. Pls let me know what 2 would cost me. Are they JD's or after market?
- Wed Apr 08, 2020 9:50 pm
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Re: Another 450C Steering Clutches
Hi Guys, sorry for the delay but I have to many things I want to do and only 2 hands:) I am back on the project and I really have gotten so much farther than I had expected. Right now I have the clutch pack on my bench and they look really good (anyone know the thickness specs for them? They are .18...
- Wed Feb 12, 2020 5:28 pm
- Forum: Late model JD crawler technical support
- Topic: Another 450C Steering Clutches
- Replies: 11
- Views: 7843
Another 450C Steering Clutches
Hi all, I am probably going to ask several questions on this thread because I am in the beginning stages of diagnosing some issues with my crawler. To start with the crawler stopped pulling a while back and I think it was only on the left side so I pulled it in and decided to replace the main drive ...