JDcrawlers Messageboard

i have a '74 350b for sale. New steering clutches 2012, roosamaster pump rebuilt 2014. Hard to start, but it does run. We're in ohio.

asking 8000.

reply to my email...skip43783@gmail.com

email me for photos. has rops, nothing on rear çept a drawbar. 6 way blade.

ok, i just read the last topic of this problem.......i know what to do now....

ok, i have an issue....am putting steering clutches on the right side of my dozer and cant remove the drive shaft from the tranny.is it that much of an issue to re-install the right side final without removing the driveshaft??

i have a 350B, the small ones above the bull gear. I thought i would be needing them, but after pulling the final drive again, theres no evidence of any oil anywhere. I think it was from overfilling the final and working the dozer on a steep uphill grade. The fibers are clean, no evidence of any oil...

depending on your location, you can always use a scrap cutting blade off a highway snowplow. We use them and they wear forever, and we weld them on.
just my 2 cents worth....you can usually get them for free at a highway dept.

Lavoy, is there a aftermarket source for the small final seals? the ones on top where the drive takes 2 in tandem.....

well,now i know not to overfill the final drives. Sucks pulling finals and replacing oily clutches. AGAIN!!

damn!

I just wanted to post a THANK YOU to everyone that has helped me doing the steering clutches in our dozer.Special thanks to Lavoy for the prompt shipping of the parts. Pushes like a JD 350 should!!!

Thanks again.

Ken, thats exactly what i did.....I didnt realize there was a ball in there.and of course, now i cant find it.......back to deere....

Hey anyone!!! After loosining the track adjuster all the way, i started pumping grease into the adjuster, and all the grease is coming out the bleed hole on the bottom of the adjuster. IO read the manual, but the directions do not seem clear to me.What am i doing wrong?? i loosened up the adjuster t...

howdy....where arre you at in central ohio....i'm in somerset, near Lancaster. i know where there is a small dozer, never stopped to see the model or make...but its a salvage yard. has several machines there.

lavoy, how do you mean rotate? top to bottom or front to back?

oh!! you mean on its axis.....did that, worked great.

ok, will try that....thanks lavoy...

Lavoy.....I am having a terrible time installing the final drive. (left side).Backing out the brake adjustment bolt all the way, i am finding that with the new brake band, the drum does not want to go into the new band.Any thoughts on this?? also....with the driveshaft installed in the final, how th...

Its ok, lavoy, my dad went to deere today to get the kit.