Search found 23 matches
- Sat Mar 18, 2017 2:44 am
- Forum: Late model JD crawler technical support
- Topic: Loosing coolant
- Replies: 1
- Views: 2004
Loosing coolant
Had 1976 350c dozers motor rebuilt inline. I don,t operate it my friends do who are loggers but don,t use it for logging they use around camp. We put about 20 total hrs on it and they say they have to keep adding coolant and oil. They can,t see anywhere it,s leaking. The one who rebuilt it said it,s...
- Thu Apr 30, 2015 12:33 am
- Forum: Late model JD crawler technical support
- Topic: Grease button fitting
- Replies: 14
- Views: 13006
Button Heads
Mcmaster- Carr
- Sun Nov 23, 2014 2:38 am
- Forum: Late model JD crawler technical support
- Topic: Finally, Light at end of tunnel for my 450(long read)
- Replies: 3
- Views: 4665
I too went through the same with a 350c dozer. Bought it for camp here in southern Vt. cheap dozer for 6000.00. Thought it would last around camp dozing hillside to make more lawn and changing driveway. First the track adjuster cracked open replaced that. Then I bought another one for other side alo...
- Sat May 17, 2014 11:55 am
- Forum: Late model JD crawler technical support
- Topic: Used track pads
- Replies: 8
- Views: 7727
used track pads
Just finish putting on last pads. Give me a call tomanytractors 802-442-2590 6am to 9 am sunday 4 pm to 6 pm mon tru fri. I, sure I can help you out. BOB
- Sun Mar 23, 2014 9:49 am
- Forum: Late model JD crawler technical support
- Topic: Used track pads
- Replies: 8
- Views: 7727
used pads
Once I get pads off will post phone number. just do not want to commit myself right now. Should be in a month will keep you in mind. toomanytractors
- Sat Mar 22, 2014 9:48 am
- Forum: Late model JD crawler technical support
- Topic: Used track pads
- Replies: 8
- Views: 7727
New Pads
The height on the new pads is inch and three quarters.
- Tue Mar 18, 2014 3:05 am
- Forum: Late model JD crawler technical support
- Topic: Used track pads
- Replies: 8
- Views: 7727
Used track pads
Recently purchased new pads for 350c - nuts and bolts. When ever the weather warms up here in southern Vt. will be putting them on. Would like to know is there any value in old pads other than scrap metal. There is three quarter of an inch on grouser and the old nuts and bolts have only been on for ...
- Fri Jan 24, 2014 1:06 am
- Forum: Late model JD crawler technical support
- Topic: whatchamacallit type electrical connector
- Replies: 21
- Views: 15282
whatchamacallit
I,ve had trouble finding these before, I think its a piggyback can be looked up on Mc Master-carr Web site
- Sun Oct 20, 2013 2:31 am
- Forum: Late model JD crawler technical support
- Topic: cheap 1975 350c dozer
- Replies: 3
- Views: 4250
cheap 1975 350c dozer
Bought this dozer to use at camp here in southern Vt. for 6000.00 did a lot of work at first then the track adjuster cracked open. Bought new adjuster and decided to get new chains and sprockets since we were at the end of adjustment. When we changed the chains we realized the idlers were bad so aft...
- Thu Jul 25, 2013 4:02 am
- Forum: Late model JD crawler technical support
- Topic: Head Gasket 350c
- Replies: 0
- Views: 1884
Head Gasket 350c
Engine would,nt start on six day of use. Motor uses lot of oil when running. Would a bad head gasket cause it not to start. Thanks Bob I posted a post this morning with topic 1975 350c won,t start. The only way I see post is in the search. I only own machine and to not opperate it.
- Thu Jul 25, 2013 2:10 am
- Forum: Late model JD crawler technical support
- Topic: 1975 350c won,t start
- Replies: 2
- Views: 3177
1975 350c won,t start
I own this dozer for all most 4 years. Never driven it due to leg injury 5 yrs ago. Bought for camp use, friends use it who are loggers at camp and know how to run it. Been using it for five or six days now and they have to keep adding oil alot. Yesterday they went to start it up and it wouldn,t sta...
- Wed Jul 17, 2013 1:56 am
- Forum: Late model JD crawler technical support
- Topic: New water temp gauge 350c
- Replies: 1
- Views: 2419
Water Temp gauge
Found the answer on a post from 440 Iron Popper after reading post understand the wiring. Thanks again Bob
- Sun Jul 14, 2013 2:18 am
- Forum: Late model JD crawler technical support
- Topic: New water temp gauge 350c
- Replies: 1
- Views: 2419
New water temp gauge 350c
I just replaced water temp gauge on my 1975 350c with a gauge for a 350c. The old one had two posts for wires and the bulb conn. The new one has three posts plus spade for bulb conn. The old gauge had two wires connected together and hooked to the left side post as you sit in dozer these two wires w...
- Fri Mar 08, 2013 3:02 am
- Forum: Late model JD crawler technical support
- Topic: Weld on grousers
- Replies: 1
- Views: 2402
Weld on grousers
Thanks for all the imput. Trying to figure out best route to take. When all added up with full grouser bar and time welding and the end product I,ll be better off replacing pads. With all the new parts on this machine best to stay with new pads. Least won,t regret down the road. It won,t be till end...
- Thu Mar 07, 2013 2:51 am
- Forum: Late model JD crawler technical support
- Topic: Weld on grousers
- Replies: 4
- Views: 4986
Weld on grousers
I was thinking about getting new pads for my 1975 350c dozer. Had to change plans when I had to replace pellet stove. Now thinking of welding on grousers. Have found grouser bar locally with price. I,ve heard of people welding on grousers that are shorter than pad and they stagger them like two on o...