JDcrawlers Messageboard

Had 1976 350c dozers motor rebuilt inline. I don,t operate it my friends do who are loggers but don,t use it for logging they use around camp. We put about 20 total hrs on it and they say they have to keep adding coolant and oil. They can,t see anywhere it,s leaking. The one who rebuilt it said it,s...

Mcmaster- Carr

I too went through the same with a 350c dozer. Bought it for camp here in southern Vt. cheap dozer for 6000.00. Thought it would last around camp dozing hillside to make more lawn and changing driveway. First the track adjuster cracked open replaced that. Then I bought another one for other side alo...

Just finish putting on last pads. Give me a call tomanytractors 802-442-2590 6am to 9 am sunday 4 pm to 6 pm mon tru fri. I, sure I can help you out. BOB

Once I get pads off will post phone number. just do not want to commit myself right now. Should be in a month will keep you in mind. toomanytractors

The height on the new pads is inch and three quarters.

Recently purchased new pads for 350c - nuts and bolts. When ever the weather warms up here in southern Vt. will be putting them on. Would like to know is there any value in old pads other than scrap metal. There is three quarter of an inch on grouser and the old nuts and bolts have only been on for ...

I,ve had trouble finding these before, I think its a piggyback can be looked up on Mc Master-carr Web site

Bought this dozer to use at camp here in southern Vt. for 6000.00 did a lot of work at first then the track adjuster cracked open. Bought new adjuster and decided to get new chains and sprockets since we were at the end of adjustment. When we changed the chains we realized the idlers were bad so aft...

Engine would,nt start on six day of use. Motor uses lot of oil when running. Would a bad head gasket cause it not to start. Thanks Bob I posted a post this morning with topic 1975 350c won,t start. The only way I see post is in the search. I only own machine and to not opperate it.

I own this dozer for all most 4 years. Never driven it due to leg injury 5 yrs ago. Bought for camp use, friends use it who are loggers at camp and know how to run it. Been using it for five or six days now and they have to keep adding oil alot. Yesterday they went to start it up and it wouldn,t sta...

Found the answer on a post from 440 Iron Popper after reading post understand the wiring. Thanks again Bob

I just replaced water temp gauge on my 1975 350c with a gauge for a 350c. The old one had two posts for wires and the bulb conn. The new one has three posts plus spade for bulb conn. The old gauge had two wires connected together and hooked to the left side post as you sit in dozer these two wires w...

Thanks for all the imput. Trying to figure out best route to take. When all added up with full grouser bar and time welding and the end product I,ll be better off replacing pads. With all the new parts on this machine best to stay with new pads. Least won,t regret down the road. It won,t be till end...

I was thinking about getting new pads for my 1975 350c dozer. Had to change plans when I had to replace pellet stove. Now thinking of welding on grousers. Have found grouser bar locally with price. I,ve heard of people welding on grousers that are shorter than pad and they stagger them like two on o...