Search found 139 matches

by NWJD fan
Mon Sep 21, 2020 10:39 pm
Forum: Late model JD crawler technical support
Topic: 450C and wildfire
Replies: 3
Views: 287

Re: 450C and wildfire

Ouch! Hopefully some rain is in the not too distant future. Wild fire burned within 500 yards of our house in 2018
by NWJD fan
Fri Aug 21, 2020 7:13 pm
Forum: Late model JD crawler technical support
Topic: Full service on old 350B
Replies: 3
Views: 746

Re: Full service on old 350B

Your local Brandt Tractor dealership should be able to get manuals for you. There is a filter in the reverser behind the plate on the right hand side of the reverser sump. I think the reverser and transmission each hold 9 quarts or litres of Hyguard or J20c spec equivalent fluid. JD undercarriage gr...
by NWJD fan
Tue Aug 11, 2020 10:48 pm
Forum: Late model JD crawler technical support
Topic: 450c oil leaks
Replies: 12
Views: 2478

Re: 450c oil leaks

Hoses disconnect under step on each side of operators compartment
by NWJD fan
Tue Aug 11, 2020 10:46 pm
Forum: Late model JD crawler technical support
Topic: 450c oil leaks
Replies: 12
Views: 2478

Re: 450c oil leaks

Rather than removing loader arms it is probably easier to remove complete loader assembly. Remove 4 pins that attach it to forward cross bar and aft attachment points. Need a good lifting setup though.
by NWJD fan
Sun Jun 21, 2020 8:37 pm
Forum: Late model JD crawler technical support
Topic: JD 450C 3325 Winch issue
Replies: 11
Views: 1456

Re: JD 450C 3325 Winch issue

A medium size water pump plier works well for removing barrel bungs if you don't have a bung wrench. The upper jaw can often be hooked into bung enough to catch and then the handle provides good leverage to turn it out. Does not work on bungs with square drive
by NWJD fan
Sun Apr 19, 2020 11:01 pm
Forum: Late model JD crawler technical support
Topic: 450 operators manual, anyone?
Replies: 8
Views: 1170

Re: 450 operators manual, anyone?

Trans temp sender is installed in round cover plate that covers transmission oil screen on RH side of transmission. You can see it if you look between side frame and belly pan on RH side
by NWJD fan
Mon Mar 09, 2020 9:03 pm
Forum: Late model JD crawler technical support
Topic: 78 450c won’t turn over but one revolution?
Replies: 35
Views: 4550

Re: 78 450c won’t turn over but one revolution?

No way you could have messed something up installing the new line on the backhoe and you have some kind of hydraulic lock up like if hydraulic quick connects are not done up properly?
by NWJD fan
Fri Feb 28, 2020 8:44 pm
Forum: Late model JD crawler technical support
Topic: JD350C - Doesn't Pull on Right Side
Replies: 12
Views: 1907

Re: JD350C - Doesn't Pull on Right Side

You can visually verify it is a 350C by looking under the seat. If there is a valve mechanism on top of each steering clutch housing with the steering linkage connected to it it is a C model
by NWJD fan
Wed Feb 26, 2020 11:31 pm
Forum: Late model JD crawler technical support
Topic: JD450C third head gasket This is getting old
Replies: 159
Views: 26221

Re: JD450C third head gasket This is getting old

Pmed you regarding oil press sender adapter. It will probably be self evident when cylinder head is reinstalled but I can send a photo if needed
by NWJD fan
Thu Jan 23, 2020 10:59 pm
Forum: Late model JD crawler technical support
Topic: Rotating flywheel for timing on 450c
Replies: 9
Views: 1546

Re: Rotating flywheel for timing on 450c

Just did it last spring. Big screw driver or small pry bar through the timing pin hole
by NWJD fan
Fri Jan 10, 2020 12:07 am
Forum: Late model JD crawler technical support
Topic: 350c wide pad parts
Replies: 4
Views: 1949

Re: 350c wide pad parts

What are you looking for? Reliable Rebuilders in Salmon Arm B.C. Canada has some wide pad stuff.
by NWJD fan
Sun Jan 05, 2020 11:50 pm
Forum: Late model JD crawler technical support
Topic: 450C hydraulic pumps - differences between 6 way and manual blade
Replies: 3
Views: 797

Re: 450C hydraulic pumps - differences between 6 way and manual blade

My understanding is 15 gpm pump is standard for dozers but 23 gpm is used if machine is running a back hoe attachment. My 450C with 6410 blade and 15 gpm pump is plenty fast. Also heard the 6 way blade is a little twitchy with 23 gpm pump
by NWJD fan
Sun Dec 15, 2019 11:42 pm
Forum: Late model JD crawler technical support
Topic: 350CE Alternate Serial Number Locations
Replies: 5
Views: 1279

Re: 350CE Alternate Serial Number Locations

Have you tried doing a rubbing on your ID tag? Hold some paper over the plate and lightly rub a pencil over it until entire plate area is shaded grey on the paper. This may reveal the number stamps
by NWJD fan
Wed Nov 20, 2019 9:59 pm
Forum: Late model JD crawler technical support
Topic: 350 B Backhoe Options
Replies: 4
Views: 1032

Re: 350 B Backhoe Options

I have a back god attachment that was originally installed on a Case/Astec 560 or larger chain trencher that was adapted to fit my 350 loader by JWB contracting who is a regular poster here. Digs about 8 feet deep, strong enough to push the loader around considerably lighter than the model 92 hoe I ...
by NWJD fan
Sun Aug 25, 2019 6:10 pm
Forum: Show & Tell
Topic: Breaking News - 400G has arrived
Replies: 4
Views: 2362

Re: Breaking News - 400G has arrived

I think the 400 is more of less 450 engine and drive train on 350 undercarriage