Search found 27 matches

by tzbmcp
Tue Aug 19, 2014 5:29 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 420 for sale
Replies: 3
Views: 6456

Not sold, still available, make an offer. Come and get it. It's going to the NE 2 cylinder show this weekend if not sold by then.
Thanks
by tzbmcp
Sun Aug 17, 2014 8:28 am
Forum: Lavoy's Little Shop O' Deeres
Topic: 420 for sale
Replies: 3
Views: 6456

420 for sale

JD 420 crawler. $2990 OBO. Runs and steers great. Needs good home, done with projects. Plz include phone number in reply. Located in So. NH. CL add with pics:

http://nh.craigslist.org/grd/4623306473.html

Thanks.
[/img]
by tzbmcp
Tue Jul 26, 2011 3:43 pm
Forum: Early model JD crawler technical support
Topic: studsssssssssssssssssssssssssssssssssssssssssssssssck in 3rd
Replies: 2
Views: 3255

studsssssssssssssssssssssssssssssssssssssssssssssssck in 3rd

420c: was showing Dad where the gears were with tractor stopped, engine off. When I fired her up (with clutch in), all sounded well until i took foot off clutch and leaped forward in 3rd. Quick check showed Im stuck in 3rd gear, shifter moves freely but wont engage any other gear. Am about to take s...
by tzbmcp
Sat Jul 23, 2011 3:53 am
Forum: Early model JD crawler technical support
Topic: battery box
Replies: 9
Views: 8214

Thanks much.
by tzbmcp
Wed Jul 20, 2011 5:15 pm
Forum: Early model JD crawler technical support
Topic: battery box
Replies: 9
Views: 8214

thanks Lavoy. Any suggestions on drill/tap sizes. prolly use a lock washer.
by tzbmcp
Wed Jul 20, 2011 4:47 pm
Forum: Early model JD crawler technical support
Topic: battery box
Replies: 9
Views: 8214

battery box

420: battery box bolts are broken off in the crawler and i cannot get them out - easy out, penetrating oil and heat have failed. was told i could just drill em out and re tap holes but am worried where the metal scraps will go below - do i have to worry about causing damage? have a battery box which...
by tzbmcp
Sat Jul 16, 2011 7:23 pm
Forum: Early model JD crawler technical support
Topic: 420 set screw on fan blade
Replies: 7
Views: 6022

thanks much, found near exact match at local ACE hardware. got bolt out nearly effortlessly using Alden Drill Out - highly recommend this as I've never been a fan of easy out. this thing has drill bit on one end and extractor on other. very easy to use. swear i dont work for the company.
by tzbmcp
Sat Jul 16, 2011 7:25 am
Forum: Early model JD crawler technical support
Topic: 420 set screw on fan blade
Replies: 7
Views: 6022

is set screw a specific part or might i be able to find replacement at hardware store?
by tzbmcp
Sat Jul 16, 2011 7:17 am
Forum: Early model JD crawler technical support
Topic: 420 set screw on fan blade
Replies: 7
Views: 6022

thanks. radiator is off.
by tzbmcp
Fri Jul 15, 2011 8:30 pm
Forum: Early model JD crawler technical support
Topic: 420 set screw on fan blade
Replies: 7
Views: 6022

420 set screw on fan blade

minimal torque on fan blade set hex screw and it broke right off. options?
by tzbmcp
Fri Jul 15, 2011 1:33 pm
Forum: Early model JD crawler technical support
Topic: 420 generator
Replies: 3
Views: 3704

not sure how im gonna detension the belt and get it out without taking out the rad.
by tzbmcp
Fri Jul 15, 2011 9:42 am
Forum: Early model JD crawler technical support
Topic: 420 generator
Replies: 3
Views: 3704

420 generator

replacing generator and belt today. since i dont yet have a repair manual. want to make sure im not overlooking an easier way to do this. removed grill/cover. looks like need to drain coolant, then take off radiator, remove fan belt to get to generator belt. remove old parts and put on new including...
by tzbmcp
Sun Jun 26, 2011 6:50 pm
Forum: Early model JD crawler technical support
Topic: JD 420
Replies: 26
Views: 20936

Thanks.
by tzbmcp
Sat Jun 25, 2011 10:49 am
Forum: Early model JD crawler technical support
Topic: JD 420
Replies: 26
Views: 20936

thanks Jim. I counted those things 3 times on each side and came with 31 every time. Sounds like if theres 31 then there'll be more wear quicker. Any thoughts why they might be 1 shy? Can I get one link for each side, and if so am i opening up a whole can o worms? When I counted 31 the other day I d...