JDcrawlers Messageboard

I am in need of a T13709t brake shaft arm and a t13707t brake spring for a 2010 HLR trans thanks Greg

thanks again to the many helpfull people on this site got one on the way!

machine shop just called my head is junk had been cracked and welded before now is leaking around the weld any ideas on where to find one? thanks Greg

enjoyed the video good looking machine

I am in need of a t18790t or t17159t engine clutch fork for a 2010 with a h-l-r transmission

my shaft and rockers are shot also but i have another one that came off the motor with the good crank (good as not in two parts) i need to ck the valve guides. got done takeing it apart last night and was pleased to find a new set of deere pistons and new deck plate this thing could not have ran ove...

sent you a pm

thanks again to the many helpfull people on this site i wanted to find the problem before going any further whoever put the head on put the stud in the front hole

started takeing the motor apart that has a broke crank i bought for parts to get my dozer running and took the valve cover off and there has not been any oil to the rocker shaft for some time probably since it was rebuilt how does the rockers get oil? did not see a bolt with a hole in it like a case...

Thanks for the quick reply i am in Stanford Ky 40484 what is a good time to call you this weekend? im not in a big hurry for the parts im just trying to round up enough parts to make this my winter project thanks Greg

I bought a 2010 with a bad motor that had been sitting for a long time. I was told everything else was fine. I finaly got around to pulling the motor the other day and the clutch fork through out bearing and other links and parts were not there and the bellhousing had alot of fluid in it was it poss...