Search found 8 matches
- Thu Sep 29, 2011 1:13 pm
- Forum: Late model JD crawler technical support
- Topic: 450E Winding sound when in reverse
- Replies: 0
- Views: 2467
450E Winding sound when in reverse
i know my 450e has reverse issues because reverse dies when it gets warm,but its fine for about 30 minutes except for the winding sound that i hear in reverse,does this sound point to a particular problem with the HLR? The manual says you can increase the HLR pump pressure by addin or subtracting sh...
- Sun Sep 11, 2011 2:21 pm
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
- Sun Sep 11, 2011 11:56 am
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
thanks digitup. so what parts in the HLR can be replaced with out removing the engine? or complete assembly like the book says. i think what you said is right the high range seems perfect but the reverse dies almost totally and the low range develops a delay at the same time. i have in the past chan...
- Fri Sep 09, 2011 5:53 am
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
thanks Jason, so how do you guys work on the trans?do you remove the complete unit from the machine like the manual says? or do you remove the engine and bell housing and work on the trans from the belly of the machine? would there be an advantage in removing the top from the trans and looking insid...
- Thu Sep 08, 2011 7:18 pm
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
thanks,, i think i can do the rebuild but its stories like JWB Contracting that scare me, if i can get the time to tear it down,and then do something wrong or not notice something and have to do it all over again!!!!!!!!!!!!!!! thats hard stuff. I would rather buy a complete rebuilt trans i think wi...
- Wed Sep 07, 2011 7:58 pm
- Forum: Late model JD crawler technical support
- Topic: BEST WAY TO REMOVE THE HLR TRANNY?
- Replies: 1
- Views: 2531
BEST WAY TO REMOVE THE HLR TRANNY?
Hi, i have been doing a lot off reading tryin to prepare myself for the massive job of rebuilding the HLR in my 450e. i noticed that the tech manual instructs you to remove the trans and final drive through the rear of the unit, but most people that i have read about take the engine out and remove i...
- Wed Sep 07, 2011 5:47 pm
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
thanks guys, i guess i have to live with it now and try to get the darn tranny fixed, i borrowed a tech manual from a friend and it sounds like a massive job even to get the tranny out! i have lots of experience with machanic work, but this job i will not be paid for ha ha h a i have read stories he...
- Wed Sep 07, 2011 10:39 am
- Forum: Late model JD crawler technical support
- Topic: i got screwed at an auction jd 450e no reverse when warm, !
- Replies: 15
- Views: 23075
i got screwed at an auction jd 450e no reverse when warm, !
bought an 1986 jd 450e at a richie brothers auction in montreal, i bid online but i had a friend that test drove the dozer for me at the site, everything was ok when the dozer was cold, ha ha ha ha but the owner knew the tranny was toasted. also when i got it home i also noticed bubbles in the rad s...