Search found 8 matches

by Dewey Zehr
Mon Oct 17, 2011 12:57 pm
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

checked the carb.and cleaned,it seems ok.
by Dewey Zehr
Tue Oct 11, 2011 12:18 pm
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

compression from left to right is 105,125,135,125. new carb gives it a couple of pops when you hold your hand on it but thats it.plugs seem to get a little carbon build up after each try but are'nt flooded.
by Dewey Zehr
Fri Oct 07, 2011 7:01 am
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010 crawler not running

Hi.still having a hard time .Bought a new carb did'nt help,gave it a comprssion test and i have one cylinder coming in low.any advice?
by Dewey Zehr
Wed Sep 21, 2011 9:58 am
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010

yes it is a chrysler electronic ignition system.
by Dewey Zehr
Tue Sep 20, 2011 10:52 am
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010

I have spark so i put a grill lighter over the cylinder and it's getting gas fumes (flare off) I then put 2 table spoons of oil in each cylinder. After some cranking it puffed smoke and fired a couple of times . The spark didn't seem that strong to me and it has new plugs. The ignition system has be...
by Dewey Zehr
Fri Sep 16, 2011 7:31 am
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010 crawler not running

the engine ran like a dream.The problem started when i ran it out of gas,thinking it was dirt ect.... I cleaned the bowl,carb and inline filter several times.The crawler would start and run,but as soon as the temp.of the engine would come up to about 170 (not sure if gauge is correct)it would die.ev...
by Dewey Zehr
Thu Sep 15, 2011 5:27 am
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010 crawler not running

Thanx for the response.Yes i did check for blockage and also flushed the tank.gas makes it to the bowl and starts up the intake (after alot of cranking) its almost like it's something other than the carb.I say that only because i've been through the carb so many times.
by Dewey Zehr
Wed Sep 14, 2011 12:22 pm
Forum: Early model JD crawler technical support
Topic: 1010 crawler
Replies: 20
Views: 19226

1010 crawler

I have a 1010 crawler i can not make run. I have rebuilt the carb, and installed a new manifold kit(no gas makes it to the plugs).any help would be great,thanx in advance.