Those bottom bolts/nuts are easy to remove with a crowfoot wrench.
I jam a towel or some rags under the starter in case i drop the nut so I don't need to fish for it.
I have not looked at the Messageboard for a long while, so my comment is late in arriving!
Search found 563 matches
- Tue Sep 13, 2022 10:25 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C no crank
- Replies: 47
- Views: 15247
- Tue Feb 22, 2022 2:06 pm
- Forum: Late model JD crawler technical support
- Topic: Anyone put a snow blower on a 350b ?
- Replies: 4
- Views: 2954
Anyone put a snow blower on a 350b ?
I'm running out of room to pile snow in the yard and have long thought of putting a blower on the front of one of my 350's, I would like to blow the snow back into the trees. I am hoping to use the hydraulic valve not in use from the backhoe ,to run a drive motor for the snowblower. nd add a valve t...
- Wed Nov 10, 2021 8:20 pm
- Forum: Late model JD crawler technical support
- Topic: new to the 450c crawler need help died and won't crank?
- Replies: 21
- Views: 14599
Re: new to the 450c crawler need help died and won't crank?
"so I started it and it started for a second, then died again" ......here's a longshot but, this happened to me. If this crawler has hydraulic hoses in the back for an attachment then they need to be connected to each other or it wont run for more than a few seconds at best. The hoses may have came ...
- Sat Nov 09, 2019 8:25 pm
- Forum: Late model JD crawler technical support
- Topic: 450C Dozer 1974 Transmission Oil Concern
- Replies: 7
- Views: 7176
Re: 450C Dozer 1974 Transmission Oil Concern
I had the same problem, with my transmission oil in my 450c dozer. Changed it last year and, now I discover the same thing again, milky looking fluid. And, yesterday I discovered that the water was likely coming from my clutch housing. I siphoned off a gallon or so of water from the clutch housing a...
- Mon Dec 24, 2018 10:42 am
- Forum: Late model JD crawler technical support
- Topic: 3310 vs 3315 winch
- Replies: 5
- Views: 5455
Re: 3310 vs 3315 winch
Make sure you get all the control cable and handle, you will have an near impossible time finding them otherwise. My 3315 sure works well. I think the 3310 had a more complicated control handle with two opposing hydraulic master type cylinders and several hoses to the pump. 3315 just a single contro...
- Tue Oct 23, 2018 11:06 am
- Forum: Late model JD crawler technical support
- Topic: Needing a nice John Deere 350 track loader bucket
- Replies: 4
- Views: 4462
Re: Needing a nice John Deere 350 track loader bucket
How are you making out finding a bucket? I have a friend in the trailer business that regularly drives south of Chicago to pick them up, perhaps he could get one close for you? What is a fair price for a bucket, anyone ?
- Wed Oct 17, 2018 11:39 am
- Forum: Late model JD crawler technical support
- Topic: Needing a nice John Deere 350 track loader bucket
- Replies: 4
- Views: 4462
Re: Needing a nice John Deere 350 track loader bucket
I have an extra with no teeth, but I'm up in Canada, Saskatoon Saskatchewan.
- Tue Jan 30, 2018 12:18 am
- Forum: Late model JD crawler technical support
- Topic: 450-B Steering clutches swelled up?
- Replies: 8
- Views: 8188
Re: 450-B Steering clutches swelled up?
Vaulter, nice to hear this quick fix. I have a 450b loader with one stuck steering clutch. I used it for many hours this past summer and it would not loosen. Drove it with one, pain in the a**! I'm looking forward to your final video.
Scott
Scott
- Mon Jan 08, 2018 1:01 am
- Forum: Early model JD crawler technical support
- Topic: I won't say no, but it is not a Deere.
- Replies: 4
- Views: 5706
Re: I won't say no, but it is not a Deere.
It will be a treat to start it as it was in my family for at least 40 years before Dad got it. Dad had a good restoration done when he got it and never put more than a tank of fuel in it since then. Pull start on the pup motor. The pup was replaced with a spare as the original had frozen. It seems t...
- Sun Jan 07, 2018 10:37 am
- Forum: Early model JD crawler technical support
- Topic: I won't say no, but it is not a Deere.
- Replies: 4
- Views: 5706
I won't say no, but it is not a Deere.
Dad is getting fragile in his old age and it is time to clean out his storage shed. I will be picking up his 1937 Cat d2 dozer. (Cat says they started making them in 38 but Dad is sure its a 1937) Only the pup motor is keeping this old crawler from running. It had froze but there is an parts one so ...
- Mon Jan 01, 2018 8:15 pm
- Forum: Late model JD crawler technical support
- Topic: help with a 450
- Replies: 13
- Views: 13281
Re: help with a 450
I have bought most of my manuals from Deere. Just buy the least expensive on line version, copy to a memory stick, go to your nearest print shop and in a day or two you have a new manual in a binder. Plus, if you mess up some pages, it is easy to just print replacements as you need them.
- Mon Nov 27, 2017 5:29 pm
- Forum: Show & Tell
- Topic: Deere 350B engine coolant heater
- Replies: 2
- Views: 5849
Re: Deere 350B engine coolant heater
I purchased a 1500w heater for my 350c and was disappointed to see it would not fit on the side on the engine like the smaller ones do on my 350b's as, it was a lot larger. I like the spot where you mounted yours and did not think of that option. I am going to see if it will fit there when I go back...
- Fri Nov 10, 2017 2:35 pm
- Forum: Off-topic discussions
- Topic: Screenprinting shop gone
- Replies: 12
- Views: 9990
Re: Screenprinting shop gone
Insurance is worth every penny. Twice in my life insurance has rescued us from complete catastrophe. Although, I have likely paid twice in premiums compared to claims in the last 40 years, having the insurance when needed has been a blessing.
- Thu Jun 15, 2017 7:28 am
- Forum: Late model JD crawler technical support
- Topic: Another fuel problem 450C trackloader
- Replies: 20
- Views: 17592
Re: Another fuel problem 450C trackloader
There is possibly a screen at the bottom of your fuel tank. Where the fuel line attaches to the tank. Also a shut off valve there usually. Blow compressed air back into the tank from the line where it connects to the fuel pump. This is the simple solution most of the time for me, I hope it is not yo...
- Mon May 08, 2017 10:33 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 blowing coolant
- Replies: 11
- Views: 9563
Re: JD 1010 blowing coolant
I do not think that that it is a 1010 if it has a two cylinder diesel.