JDcrawlers Messageboard

Ben there were 3 pumps used on the 831 loaders the Hydreco that you referred to and then 2 Cessna pumps the15535-1TA up to 1961 and the 20014-1FFA from 1961 on. They do not list what years the Hydreco pumps were used. I have the earlier Cessna pump on mine. Thank you for the surplus center info they...

I am looking for a hydraulic pump for an 831 loader on a 1960 440 IC. It is a Cessna pump. I have tried to find parts to rebuild mine and have been unable to locate all the gaskets. If anyone has any leads on a good used pump I would greatly appreciate the help!
John K

Duke thank you for your trouble I will measure and set mine accordingly and see what happens.
John K

it s the newer style with the knuckle up by the dash. Thank you for your time
John

I have a 440IC that I have rebuilt the motor on and I am having problems setting the throttle/governor linkage. I have set it up per the service manual and the unit will idle and run fine but will not throttle up fully,I can only get about1600 rpm out of it and the governor is not even close to hitt...

Juke one other thing I forgot to mention is that they used 2 different controls on these loaders.The numbers are listed in the parts manual for both types. I am not sure if they both had the same size fittings, you will definitely want to check that our first.
John

Juke I have the pdf file saved on my hard drive if you email me at john@knearem.com I will try to forward the file to you. Oh also I do know where there is a complete control valve' used. I had to order one for parts for mine and the place called farmlandtractor.com says they do have one more. I thi...

SB the hoses to the cylinders are all 1\2 inch but there is a 3/8 fitting to the bypass valve and the return line is 3/4. You can get a parts catalog online free from John Deere that has all the hose sizes and lengths http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.Hom...

I am looking for the hood emblems for a 440, anyone have any leads?
John

Thanks for the kind words Ben. No I do not have the hoe but it did have one before I purchased the machine. The previous owner said that it was in such bad shape that he scrapped it. I could have cried, even if it was in bad shape I am sure that with a little ingenuity and sweat and maybe some of th...

well she runs...... had to order a new water pump from Lavoy though so off comes the radiator...again.......

Dan it looks like you got yourself some fine machines there I am jealous. I hope you can get the controls for the other mill soon. One can never have too many tools that is for sure!!! Now if I could just convince my wife of that.............................John

Here are a few pics of my ongoing project, I hope this link works. http://s1191.photobucket.com/albums/z478/JohnK1959/
I hope to have the old girl running tomorrow night.

Well I decided to weld the sleeve and it all worked out ok. I was able to leave some extra weld since the shifting fork did not make contact in the area of the weld. I feel pretty confident that it will hold up fine. Now if I just had the reverser reinstalled................................. I am st...

Lavoy , I sent you an email and JD440 thank you for your response about the picture posting I will see if I can get some pictures of the old girl put up. This is my first crawler but I have a few wheeled tractors under my belt, even with that I am learning a whole lot on the crawler. Have a great da...