Search found 56 matches
- Tue Jul 03, 2012 3:59 pm
- Forum: Show & Tell
- Topic: Guess the Weight Contest
- Replies: 35
- Views: 35388
- Thu Sep 15, 2011 2:36 pm
- Forum: Early model JD crawler technical support
- Topic: 430 vs 420
- Replies: 1
- Views: 3002
430 vs 420
Hello, I know this has been brought up before in earlier posts, but can't find it right now. I would like to know what are the main differences between a 420 and a 430. There is a 430 listed near me and thought about going to look at it. Thanks, Dan
- Fri May 22, 2009 9:26 am
- Forum: Early model JD crawler technical support
- Topic: Trying to ID my 350 Dozer
- Replies: 1
- Views: 3199
SN
Hello, the SN and model #is usually on the front of the seat, down by your right leg, behind the shift lever and the model # for the loader is on the dash, next to the trottle, at least on our 67 loader this is where they are located, Dan
- Thu Jan 01, 2009 7:46 am
- Forum: Early model JD crawler technical support
- Topic: Are you smarter than a 1010??????????????????
- Replies: 15
- Views: 13636
I had a 1973 Polaris TX snowmachine that would run great then all of a sudden would die, I cleaned the carbs several times, replaced the sparkplugs, wires, kill switch, coil, key switch and still the damn thing would shut down when it felt like it. Then one night while tearing it apart again I moved...
- Mon Nov 10, 2008 5:21 pm
- Forum: Early model JD crawler technical support
- Topic: Moving and reviving a Dead 1010
- Replies: 5
- Views: 5771
- Sat Sep 27, 2008 8:32 am
- Forum: Early model JD crawler technical support
- Topic: Question for jdemaris
- Replies: 3
- Views: 3788
I use to help a guy in town gather sometimes and he had a team of work horses at the time, he would feed them chewing tobacco. As much as I don't like horses, his were pretty good, they would stop a a given spot and stay until he gave a command, then go to the next gathering spot and stop till he ga...
- Sat Sep 27, 2008 6:16 am
- Forum: Early model JD crawler technical support
- Topic: Fairlead for a 1010 and canopy
- Replies: 0
- Views: 2227
Fairlead for a 1010 and canopy
Hello, if I can pickup this 1010 i'm looking at would like to find a canopy and fairlead for it in the Vermont, New Hampshire area,
Thanks, Dan
Thanks, Dan
- Sat Sep 27, 2008 5:38 am
- Forum: Early model JD crawler technical support
- Topic: Question for jdemaris
- Replies: 3
- Views: 3788
Question for jdemaris
Hello, was wondering if that is your Oliver HG on Cletrac.org, we had a 1946 HG 42 with a Ware loader that we used to gather sap with for years, that thing was great in the snow, sometimes if we had a lot of snow I would have to break the sugaring roads a month or so before we started sugaring, but ...
- Fri Sep 26, 2008 2:14 pm
- Forum: Early model JD crawler technical support
- Topic: 1010
- Replies: 1
- Views: 3019
1010
Hello, am also looking at a 1010, with manual blade, 5335 winch, straight transmission, gas jobby, would anybody know what year this sn# is, 14604.
Thanks, Dan
Thanks, Dan
- Thu Sep 25, 2008 3:24 pm
- Forum: Early model JD crawler technical support
- Topic: Going to look at a 420
- Replies: 0
- Views: 2230
Going to look at a 420
Hello, after reading all the stuff on what to look for on a 350 dozer before buying one ( we already bought one), I am now wondering if there are simular or usual relayed things to look for on a 420 since there is one near by for sale, it has a blade and a winch, the guy who owns it doesn't real kno...
- Wed Sep 10, 2008 5:35 pm
- Forum: Late model JD crawler technical support
- Topic: Buying a 350? Some things to look out for . . . many photos
- Replies: 28
- Views: 33812
Lock washers
I have a question about the lock washers, in some of your pictures you said there should never be lock washers used here, I hate to ask a dumb question, but why? I guess I have never been told the thinking behind this. Thanks, Dan
- Wed Sep 10, 2008 3:39 am
- Forum: Late model JD crawler technical support
- Topic: Tank Heater for a 350
- Replies: 16
- Views: 16508
Need to tap
Hello, have a question for jdemaris, I have the housing that needs to be drilled and tap, should it be 1/4, or 3/8, which will work better? Thanks, Dan
- Tue Jan 22, 2008 4:09 am
- Forum: Late model JD crawler technical support
- Topic: Tank Heater for a 350
- Replies: 16
- Views: 16508
- Mon Jan 21, 2008 4:02 pm
- Forum: Late model JD crawler technical support
- Topic: Tank Heater for a 350
- Replies: 16
- Views: 16508
Lavoy, after seeing a picture of the tank heater, I now know what you are referring to. When I first started working for my hometown highway department, we use to put them one our gasoline powered dump trucks, but now everything is diesel's with block heaters and now we have a huge town garage, so n...
- Sun Jan 20, 2008 3:45 pm
- Forum: Late model JD crawler technical support
- Topic: Tank Heater for a 350
- Replies: 16
- Views: 16508