Search found 18 matches
- Tue Sep 14, 2010 8:44 pm
- Forum: Early model JD crawler technical support
- Topic: 420 Points
- Replies: 20
- Views: 20049
Points on a crawler should last forever, look how much more one would drive a car and they lasted for years. You probably have weak spark from another issue besides the points, if your points always need filing you might need a new codensor,the condensor keeps the points from burning when they open.
- Tue Sep 14, 2010 8:36 pm
- Forum: Early model JD crawler technical support
- Topic: whats better 420C or 440IC
- Replies: 3
- Views: 4245
whats better 420C or 440IC
I have a 420C and a 440IC with a blade, whats the best one to keep for performance and parts avalibility?
- Tue Sep 14, 2010 8:31 pm
- Forum: Early model JD crawler technical support
- Topic: 440 water pump shim
- Replies: 2
- Views: 3179
Lavoy
Opps, made a error the shim goes in the upper left corner. when you mount the pump to the block the surfaces dont match up tight in the upper LEFT corner thats why thy put a shim in there. My pump must have been changed at one time and the shim wasnt installed on the new one. I guess they must not r...
- Fri Sep 10, 2010 8:50 pm
- Forum: Early model JD crawler technical support
- Topic: 440 water pump shim
- Replies: 2
- Views: 3179
440 water pump shim
Took my pump of to replace with a new one and the manual says make sure you install the shim in the upper right corner, mine was missing when I tool it off. Anybody know what size shim was used? Also I need to make 2 new gaskets to mount the pump. one for the block and one for the inlet elbow, what ...
- Mon Feb 01, 2010 8:22 pm
- Forum: Early model JD crawler technical support
- Topic: 420 oil pan bolt torque
- Replies: 0
- Views: 1782
420 oil pan bolt torque
I need to change my pan gasket anyone know what the bolt torque should be for a 420C :?:
- Sun Feb 15, 2009 11:17 am
- Forum: Early model JD crawler technical support
- Topic: Need 420c oil pump
- Replies: 3
- Views: 4152
Need 420c oil pump
Does anyone know where ya can order a oil pump for a 420c, my local Napa guy cant seem to find one any where. Im sure JD has one but I thought Id try to save a few bucks.
- Sun Oct 05, 2008 8:40 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC getting way too hot!
- Replies: 6
- Views: 5937
Heres a way to check your engine temp. first start it up and let it idle. Take off the radiator cap and when it warms up you should be able to see the prestone circulating in the radiator. if it isnt moving maybe your T stat is stuck shut. or your water pump isnt pumping. if its idling and the prest...
- Wed Oct 01, 2008 8:28 pm
- Forum: Early model JD crawler technical support
- Topic: Need a good 440IC carb kit
- Replies: 2
- Views: 3103
- Mon Sep 29, 2008 7:25 pm
- Forum: Early model JD crawler technical support
- Topic: Need a good 440IC carb kit
- Replies: 2
- Views: 3103
Need a good 440IC carb kit
Got a carb kit from auto parts store but it dosent have the load ajusting needle or the fittings it mounts in. Has anyone got a carb kit with all the parts. The aoto parts guy says the kits are good for all kinds of marvel carbs and most didnt have the load adjusting needle in them so he figured the...
- Sun Mar 23, 2008 8:33 pm
- Forum: Early model JD crawler technical support
- Topic: Repairing 420 oil pump and head gasket
- Replies: 6
- Views: 5996
Repairing 420 oil pump and head gasket
Last fall I ran my 420 for a few hours and parked it, it ran fine. A few weeks later I was going to change the oil and when I drained it, the oil had anti freeze in it. A blown head gasket of course, I changed the oil and started it up so I could put it it the garage for winter repair. But when I st...
- Sun Mar 23, 2008 8:22 pm
- Forum: Early model JD crawler technical support
- Topic: 440 IC 12V conversion
- Replies: 1
- Views: 2743
440 IC 12V conversion
My 440 Ic starter is quite tired and drains the 6v battery quite fast. Seems to work fine when I jump it with a 12v battery. My question is should I put in a new starter or just convert the machine to 12v.
- Mon Mar 19, 2007 8:36 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 voltage and oil pressure
- Replies: 1
- Views: 2708
1010 voltage and oil pressure
:?: Was the 1010 6v or 12v. What is the normal oil pressure reading on a 1010
- Mon Mar 19, 2007 8:04 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 198857
- Mon Mar 19, 2007 8:00 pm
- Forum: Early model JD crawler technical support
- Topic: Loader won't lift - update
- Replies: 11
- Views: 11006
I have a henery on my 420 and it was having lift problems. Theres a sreen in the fitting that atacthes to the feed line to the pump. it keep s debris from getting into the pump kinda like a oil filter.This is the fitting that is screwed into the loader tank. It looks like a regular pine fitting but ...
- Mon Mar 19, 2007 7:48 pm
- Forum: Early model JD crawler technical support
- Topic: 440 manifold bolt torque
- Replies: 0
- Views: 1845
440 manifold bolt torque
Does any one know what I should torque the manifold bolts to,it dosent say in my manual . How about the four bolts on the water outlet manifold, whats the proper torque for them.