I'd be looking at the small screen in the return to the injection pump. If the governor ring goes, it plugs up that screen leans out the engine (rev up) and then it cant start.
You might pull the timing cover on the injection pump and hold a rag under see if you have governor ring pieces there.
Search found 477 matches
- Mon Feb 12, 2024 8:20 am
- Forum: Late model JD crawler technical support
- Topic: 450 C Not Starting but runs on ether when sprayed
- Replies: 8
- Views: 5205
- Wed Nov 15, 2023 7:58 am
- Forum: Late model JD crawler technical support
- Topic: JD350 Broken Crossbar Bolt Replacement
- Replies: 3
- Views: 3226
Re: JD350 Broken Crossbar Bolt Replacement
I see the pictures.
- Fri Nov 10, 2023 1:19 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 Broken Crossbar Bolt Replacement
- Replies: 3
- Views: 3226
Re: JD350 Broken Crossbar Bolt Replacement
Nice repair work ! I almost always have to throw quite a bit of heat at the broke bolt to get them to spin out. They can be a real pain.
Welcome to the boards!
Welcome to the boards!
- Tue Oct 31, 2023 7:39 am
- Forum: Late model JD crawler technical support
- Topic: model c roosamaster injection pump leaking fuel at throttle pinion lever.
- Replies: 3
- Views: 2334
Re: model c roosamaster injection pump leaking fuel at throttle pinion lever.
I will second it's better to send them off and have the whole unit rebuilt. All the seals are the same age as the one that is leaking...
- Thu May 18, 2023 6:55 am
- Forum: Late model JD crawler technical support
- Topic: 450C steering clutches oil
- Replies: 9
- Views: 14132
Re: 450C steering clutches oil
Yes, the screen is at the bottom of the sump. It's going to be alot of oil be prepared to catch all that.
- Tue May 09, 2023 11:28 am
- Forum: Late model JD crawler technical support
- Topic: 450C steering clutches oil
- Replies: 9
- Views: 14132
Re: 450C steering clutches oil
Mine does not have common sump. I have to check all three separately. Most people seem to suggest if the fill plug is removable ie not lock tighted in they do not have the common sump done.
- Tue Apr 04, 2023 7:43 am
- Forum: Late model JD crawler technical support
- Topic: Trans fluid draining into final drive
- Replies: 3
- Views: 2290
Re: Trans fluid draining into final drive
Sounds to me like the bottom port of the common sump is plugged not allowing fluid to drain back.
- Wed Feb 15, 2023 8:32 am
- Forum: Late model JD crawler technical support
- Topic: JD350B Brakes
- Replies: 34
- Views: 9535
Re: JD350B Brakes
Is there any chance this is just a really weak motor? Doesn't have the power to turn both sides? I guess i'm trying to think outside the box here.
- Thu Feb 02, 2023 3:49 pm
- Forum: Late model JD crawler technical support
- Topic: 450b capacty data and spec sheet
- Replies: 2
- Views: 1796
Re: 450b capacty data and spec sheet
I think the 450b will be more like the 450c than the 450's. Are you looking for something specific ?
- Fri Jan 06, 2023 8:45 am
- Forum: Late model JD crawler technical support
- Topic: Identify this crawler
- Replies: 9
- Views: 3436
Re: Identify this crawler
I'd guess it's a straight with C stickers.
- Tue Jan 03, 2023 8:08 am
- Forum: Late model JD crawler technical support
- Topic: 450c needs a squirt of ether to start then runs and starts fine
- Replies: 5
- Views: 2423
Re: 450c needs a squirt of ether to start then runs and starts fine
Mine is the exact same way even after having the injection pump rebuilt. Been that way the entire time I've owned it. I know I need to rebuild the motor as it has low oil pressure (but enough) I assume it's a lack of compression causing the issue but I certainly do not know for sure. The people on t...
- Tue Dec 20, 2022 10:44 am
- Forum: Late model JD crawler technical support
- Topic: Need help hydraulic oil
- Replies: 7
- Views: 2650
Re: Need help hydraulic oil
As stated that will probably work in the hydraulic system but you should not run that in the HLR. You will have to keep 2 oils around, which no one likes to do that is why most of us run a hydraulic/transmission oil in everything. I purchase mine in bulk 55 gallon barrels from Petrochoice and save a...
- Thu Nov 17, 2022 10:59 am
- Forum: Late model JD crawler technical support
- Topic: John Deere 450b
- Replies: 11
- Views: 3907
Re: John Deere 450b
If it's like my 450c the oil pressure sending unit is right rear of engine. It should have a filter in the tank yes, you'll have to open the top of the tank to service it. Mine had fallen off and was in the bottom of the tank.
- Thu Nov 17, 2022 10:48 am
- Forum: Late model JD crawler technical support
- Topic: 350c thrown track
- Replies: 2
- Views: 2008
Re: 350c thrown track
Probably so, if it's an original style adjuster, remember you do not need to take the bolt all the way out just loosen it till grease starts to flow out the hole. Then you are less likely to loose the BB.
- Mon Nov 07, 2022 8:05 am
- Forum: Late model JD crawler technical support
- Topic: 350B injection pump rebuilder
- Replies: 3
- Views: 2500
Re: 350B injection pump rebuilder
I highly recommend "thepumpguysc" from the heavy equipment forums. You can send him a message with what your have and he's very responsive, I had my pump back in less than 10 days total.