JDcrawlers Messageboard

Thanks for the info

will a winch off a jd555a fit on a jd455d

A shop manual would be a big help , I have seen them on ebay around $200.00.

And yes like a vehicle

With cover off clutch pedal out engine running should sling oil everywhere. Look for a small pipe plug should take allen wrench, this is were you check oil pressure . If main shaft is not turning it will not have oil pressure , main shaft also turns the transmission oil pump.

You have the cover off the top of transmission and no shafts turn when engine is running . I have seen center of clutch break out .

I found out 450g LT don't to break the track to remove steering clutch THANKS

I have a transmission out of a 450b I think is the same southern in area

may be main engine clutch

Does the track have to be broke to remove steering clutch to remove pinion shaft from steering clutch

I have a complete transmission out of a JD450B for sale . $375.00 THANKS DAVE

I know the 450 b c d & e 's used the same transmission & HLR unit . With improvement each time they changed letters . I read about this on the message board some were just don't remember were I found it . Maybe someone else can tell where it's at .

If you need the engine clutch Kentucky Clutch can fix you right up . There in Brooks KY about 12 miles south of Louisville on interstate 65 . The phone number is 502 955 9173. Also you can change the brake without removing the steering clutch drum or braking the track. If you live at Columbus IN Bro...

After reading your post again you are talking about engine oil . The oil behind the starter there is a oil pressure port with a oil sending unit that goes to the oil pressure gauge .

I would not weld the track frame to the cross member . The cross member is made out of cast & the track frame is metal . I worked at a jd INDUSTIAL dealership for twelve years and have see it tried never see the weld hold. The track frame has bolts & bushing in it so it have some give . If the machi...