JDcrawlers Messageboard

Thank you sir and thanks to everyone I had a gentleman trade me a decent sized bobcat even for it, thanks for your interest. -Chris

price for complete machine right now is at $5000 obo cash talks

I am considering parting out the machine since there doesn't seem to be much interest and so if anyone needs any parts let me know. Machine has to go my mom is selling her farm and moving.

Sorry the machine is in Germantown, OH 45327 and I can deliver locally for a reasonable fee

I have a 1974 john deere 350bb with backhoe it has been sitting a while and will need work, but does start and run and move and one of the track brakes works. the backhoe needs a hose or two but everything on it functioned as it should. I have the backhoe disconnected and sitting in a barn. The trac...

Well must have been holding my tongue just right because i got the deere belt on there. I took the grill out and loosened the hydraulic pump then went to the crankshaft and started prying nice and easy till I got enough room to slide the belt between the pulley and the pump shaft. Thanks again!!

Thanks for all the help guys i have a belt from deere the tractor is sitting at the job site so I may also grab a linked belt as well to be sure i can get it going tonight thanks for everything!!!

Hey guys I have a 35bb and I lost a fan belt the other day I am going to pick one up today but the question I have is on the crankshaft of the motor it looks to be a disconnect for the hydraulic pump but I can't locate a lever or anything to acuate it and I need to get the belt on the crank what can...

Yeah the oil level was rising and I could smell the fuel in the oil . Thanks for the help I will double check those umbrella seals and will check that bushing while its apart thanks again guys.

Hi guys I am in need of some help I have a John Deere 350bb and I am getting fuel in the motor oil. I eliminated the fuel pump on the side of the block and went with an electric one. I also took the shaft out of the center of the injection pump and put new umbrella seals and new o rings on the shaft...

So what do you think I could get out of it the way it is with the track lever fixed? That way I have something to go off of it when I list it for sale.

The other track frame is perfectly strait. I have a few jobs to do on the farm with it and then probably will sell it. The rollers seem to all work ok. The machine just needs the track lever adjusted on the left side to function 100%.


Thanks for all the help!!!!

-Chris

I gave 900 for it so did I do ok I probably have now 1000 in it.

Hey got everything on the 350bb working properly except the left track brake and got it home what do you think its worth? The left track is bent to where the front of the track is off the ground a little bit in the front and it has a hydraulic hose that is leaking slighty. https://fbcdn-sphotos-a.ak...

Hey I got the backhoe to pick right up this morning and put the lock pin in it so it doesnt drift down thanks for everyones help I need to get it hauled i have a gooseneck put its only a single wheel dual axle. If there is anyone around springboro ohio that wants to haul it let me know, it needs to ...