JDcrawlers Messageboard

oh i forgot-- service manual it looks like it has always been with the dozer so i guess they could have updated some of it by now

Bingo!!!! Whew!! i told you guys we are rookies k when they took the drum off (with the clutches inside)(the housing) that left the shaft still on the dozer, then when they started, thats how they put it back, one fiber plate then the hub (which has a large snap ring) then the first metal disk, afte...

thanks for the help from all the paper work that was in the service manual that was with the 350 it looks like it came from a ski resort in kewaskum wi. will tell them to check for a plug. this is a great little dozer just having probs with the clutches on one side. it has all the attachments for pt...

hey thanks they replaced all plates and the pressure plate to be sure. we couldnt figure out why we were having to adjust the clutches so often till we took it apart. someone must have put worn plates in it and wrong when the did cause it was put back together in the same order with the first plate ...

my son talked to the guy from CRAWLER HEAVEN this morning and he said the plates DO go in with one fiber in front of snap ring then a metal one on the other side of it . thought this might help someone else if they run into the same situation.just cant figure out why they put them in the wrong way u...

HI AGAIN REALLY COULD USE SOME HELP . IF ANYONE KNOWS ABOUT THIS STUFF. OK WE HAVE NEW METAL AND FIBER PLATES TO GO BACK IN. ON FURTHER INSPECTION OF PLATES THE METAL ONES HAD TURNED BLUE (SURE SIGN OF BEING HOT) STILL HAVENT GOT ANY ANSWER ON THE PLACEMENT OF THE FIRST FIBER DISK, HUSBAND TRYED IT ...

hi yes they set the fingers on the pressure plate , no oil just water on the plates.. they took it apart this week end and found the prob. gonna need new fiber plates . they think the snap ring on the hub kept it the first plate from contacting the brake drum and when they tightened the thing down i...

hi guys hope someone can help with this. my hubby and son have bought a jd 350 ,dont know the yr i think it was made in the 70,s from some of the paper work that came with it any who, they have had to replace the steering clutch's-throw out bearing- brake band and pressure plate on one side, this wa...