After a search on this site, I think I found the solution. It appears some else had the same issue & posted the fix. Thanks to all for looking
Butch fro Pgh
Search found 47 matches
- Sat Apr 10, 2021 9:01 pm
- Forum: Late model JD crawler technical support
- Topic: 350 starter issue
- Replies: 1
- Views: 2031
- Sat Apr 10, 2021 8:27 pm
- Forum: Late model JD crawler technical support
- Topic: 350 starter issue
- Replies: 1
- Views: 2031
350 starter issue
I bought a 350B loader several years ago. It always acted like it had a weak starter. It barely got the machine running. I was able to get it started to do the project at hand. I decided to sell it and a friend advised to fix the starter issue for an easier sell. I got a new starter through Advance ...
- Wed Sep 06, 2017 1:45 pm
- Forum: Late model JD crawler technical support
- Topic: Broken hyd hose
- Replies: 2
- Views: 2577
Broken hyd hose
I had the misfortune of a ruptured hyd hose on my 350 loader. This hose is for the bucket "roll" & it is located is the most unacessable location on the machine. It is buried deep in the left side of the cockpit area, right below the pivot point for the rear boom arm. I can barely see the fitting. I...
- Wed Jun 14, 2017 3:06 pm
- Forum: Late model JD crawler technical support
- Topic: John Deere 350b backhoe hookup questions
- Replies: 12
- Views: 9222
Re: John Deere 350b backhoe hookup questions
I would be very cautious with all the extra weight of the hoe on the back of your 350. I had a 9300 hoe on my 450 & it was still tail heavy.
- Tue Jan 24, 2017 11:28 pm
- Forum: Late model JD crawler technical support
- Topic: 450 EXHAUST MANIFOLD
- Replies: 3
- Views: 4368
450 EXHAUST MANIFOLD
I been looking for an exhaust manifold for my straight 450 loader, without too much luck. Are there other JD models that I can fit? I find it hard to believe, JD made a manifold to fit only one machine.
- Thu Dec 15, 2016 3:05 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 450 exhaust manifold & muffler
- Replies: 0
- Views: 3339
450 exhaust manifold & muffler
I need an exhaust manifold for a straight 450 loader.
- Wed Nov 09, 2016 2:58 pm
- Forum: Late model JD crawler technical support
- Topic: 93 Backhoe vs 9300 Backhoe
- Replies: 2
- Views: 3689
93 Backhoe vs 9300 Backhoe
Can anyone advise the difference between a model 93 backhoe & a 9300 backhoe? I know the 93s were made in the sixties & the 9300 in the eighties.
- Tue Jun 14, 2016 9:29 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450 loader hydraulic filter
- Replies: 3
- Views: 4327
JD 450 loader hydraulic filter
Anyone know a part number for the suction side filter located in the hydraulic tank? I need to change mine, as it appears to be the original. There are no numbers shown, only "COLLIERVILLE TENN. STRAINER COMPANY" It measure 3.5" diameter & 5 "long. Also, where to purchase the filter. Butch from Pgh
- Wed Apr 27, 2016 9:02 am
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20248
- Mon Apr 25, 2016 12:07 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20248
I'm still trying to find a pressure relief valve on my 450. The hoe works even worse now. I cannot find anything that even looks like a relief valve. Can the relief pop-off valve on the tank affect the hoe. I don't know where to even look anymore! My 350 manual mentions a flow divider with a hoe on ...
- Sat Mar 12, 2016 9:57 pm
- Forum: Late model JD crawler technical support
- Topic: hydraulic filter in tank jd 350 loader
- Replies: 8
- Views: 9606
- Sat Mar 12, 2016 3:43 pm
- Forum: Late model JD crawler technical support
- Topic: hydraulic filter in tank jd 350 loader
- Replies: 8
- Views: 9606
- Wed Feb 17, 2016 10:50 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20248
What I can't understand is, why doesn't the engine bog down, when the hoe stalls? Even with low oil flow, the pump should still force oil to the cylinders. It might take longer than normal, but it should still reach max working pressure. This is what makes me believe there is a pressure by-pass some...
- Wed Feb 17, 2016 3:00 am
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20248
I am having the same problem with the same machine. But, the low power in the hoe just started recently. The front loader works quite well. The hoe stalls out trying to dig fairly soft dirt. I was told there is an internal pressure relief valve that could be the culprit, but where is it located? I k...
- Mon Feb 15, 2016 11:02 pm
- Forum: Late model JD crawler technical support
- Topic: Model 92 backhoe
- Replies: 0
- Views: 2140
Model 92 backhoe
I have a 92 backhoe mounted on a JD450 & I decided to sell them together. I got an offer for just the backhoe. While doing a demo dig, it seems like the hoe lost a lot of digging/pulling power. The engine did not bog down at all. The hoe just sorta stalled. even in soft ground. The potential buyer s...