JDcrawlers Messageboard

Suggest you drain reverser, remove filter & catch all oil(look at quality of old oil) then use a magnet inside to look for any metal at bottom of case! If reverser bearings have come apart you will make it much more expensive if you ruin SHAFT., & you can make it worse if you try to run when it does...

There are two bolts coming through the left side frame that are hidden by the Lift bracket that your lift cylinders anchor to. These are 5/8" bolts with 15/16" heads on them and a box end wrench is the only way I know to get them out short of removing the lift bracket. A real Pain!!! ( Left side fr...

Got the reverser out, missed 2 cap screws.
Noticed some contaminated oil/water in the housing area between the trans and reverser, this area should have been dry?
Where the female coupling joins the 2.

I am attempting to remove the reverser I have removed the engine but am having difficulty with removing reverser. Have removed all cap screws, & expected reverser to slide out like engine.The coupling between trans & reverser should just slide off? What am I missing. can send pics or may post Do I n...