Search found 7 matches
- Fri Apr 05, 2013 6:18 am
- Forum: Early model JD crawler technical support
- Topic: No power to the left track
- Replies: 2
- Views: 2806
No power to the left track
I was out working my 440icd crawler and noticed that I was losing power to the left track, right side still good. By the time I made it back to the house it lost all power. I will be tearing it down. Anyone have any thoughts to what happened ?
- Sun Apr 15, 2012 6:51 pm
- Forum: Early model JD crawler technical support
- Topic: Taking the sag out of the track.
- Replies: 2
- Views: 3468
Taking the sag out of the track.
I through a track on my 440, I had to separate the track to put it back on. My question is, do I take all the sag out of the track or leave some? Should I take the sag out ever time I use it, or is it okay to have a little sag. I don't want to through a track again as I'm work deep in the woods. Any...
- Wed Apr 04, 2012 7:08 am
- Forum: Early model JD crawler technical support
- Topic: New pressure plate
- Replies: 0
- Views: 2640
New pressure plate
Thanks for all the info. Disassemble left steering side, found back trow out bearing and pressure plate. Replaced with new adjusted and reassembled. Steers great.
Thank to all who responded to my post p
Thank to all who responded to my post p
- Tue Mar 27, 2012 11:45 am
- Forum: Early model JD crawler technical support
- Topic: pressure plate
- Replies: 1
- Views: 2596
pressure plate
Just removed left side of 440 icd steering clutch's.The throw out bearing has play from side to side and noticed that the fingers on pressure plate are compressed. (Shouldn't the fingers be up, out or not under a load?) Not sure on the mechanic, assuming when the trow out bearing comes in contact it...
- Thu Mar 22, 2012 9:20 am
- Forum: Early model JD crawler technical support
- Topic: steering clutches
- Replies: 1
- Views: 2714
steering clutches
440icd. Left side not steering. Remove left and right inspection plate and compared. All seems to be the same except the brake. When the left handle is pulled back I could see that it wasn't working, so I adjusted and know when I pull back the engine dies down and no left movement. Any ideas..
- Wed Mar 21, 2012 10:36 am
- Forum: Early model JD crawler technical support
- Topic: steering clutches
- Replies: 4
- Views: 4578
- Tue Mar 20, 2012 3:53 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutches
- Replies: 4
- Views: 4578
steering clutches
Just purchased a 440 icd serial # 459727, not sure of the year. This is my first crawler. The previous owner changed the steering clutches on right and left side. Only the right side works. Before I go tearing into it, is there any kind of adjustment that can be done? If I have to tear into it, what...