JDcrawlers Messageboard

sounds like the splines are frozen, had the same problem with my 350 ended up having to make a puller to remove the axel shaft. bob

I will have to say the same if you are looking for parts or help contact Lavoy ! he has helped me out a few times getting parts for my 350. plus the message board can be a life saver you will always find someone here to help if you have a problem.
bob

hope every thing comes apart easy. I ran into a frozen shaft had to build a puller. i posted pictures as i went along in fixing the steering clutches.

http://www.jdcrawlers.com/messageboard/ ... highlight=

I had to install new steering clutches and now it works great.

sounds like you got water inside the steering clutch , i did the same thing last year and it was water that took out the steering clutch. check to see if the drain plugs are in the bottom of the drives. thats where the water would enter.

As Lavoy said Drive it up onto 4*4s or 6*6s that way you will have room under it to work in order to get the bolts out. have already done this 2 times.
right side clutch and then the transmission . good luck!

well I got it done with the help from Lavoy finding and shipping me all the parts I needed. two days to put it back together and finding out one of the drives was not happy with thew brake band :( I must say I got pretty good in removing the drives ,and putting them back on. here are some pictures o...

I would check with Lavoy.

you can also try this site i got my all my books from them. https://www.davenporttractor.com

would you maybe talking about the bolts the hold the front cross bar. when i took my machine apart I had to remove the rear bolts in order to get the transmission out. with out them the motor and transmission will move check out the picture to see if they are the bolts that are missing. there is not...

are you talking about the two bolts on each side of the main frame that holds the loader they are under the fender and if so they should have a dowel and a retainer on the back side that the bolts go into to hold it to the frame, the front has two pins that hold it to main frame also. I have the who...

well just took off the transmission

now its time to rebuild it.

[/img]

well I am doing the same pulling the rest of the transmission out this weekend in order to fix the bearings and as of now two gears.

it looks great!