JDcrawlers Messageboard

Thanks for the information. Helped out thanks

Okay here is the question. On a 450b how many fiber clutches should there be and how many steel ones. When I took mine apart it had nine fiber and eight steel. Which one fiber and steel was on the other side of the snap ring on the inner hub. The manual and I think the JD parts page call for eight f...

Hi
I was wondering if anyone out there knows how to adjust the pressure plates without having the original JD Gauge. Any information would be great. I just had the pressure plates turned and need to readjust them.

Thanks
John

Hello there, I am wondering out there if anyone knows how to set the fingers on the pressure plates without the gauge so you can get the proper adjustment ? I had the pressure plates resurfaced and now I need to get the proper adjustment. I know wherethey were before I took them apart, just wonderin...

Thanks Guys, got them off today. They didnt't take much to pry them off. Nothing a hammer and Chisel wouldn't cure.

Thanks again

Is there anyone out there that has ever removed bonded material off brake bands? Mine do not have rivets and want to put new lining material and rivets on.
Thanks in advance,
John

Okay thanks got it finally. Now just have to pull the inner shaft out. Anyone know the thread size on the inner shaft? I have been told it's a 3/8 x 16 pitch.

Okays guys her it goes, As most of you probably have done, I am trying to remove the steering clutch out of my dozer. It is totally locked up. The dozer is up in the air and both tracks are off. I need to get the clutch pack spun around to get the set screw out to remove the final drive smaller gear...

Hi,
Happy Thanksgiving! If its all the same ill just stay with this one. Its no big deal for me I just did this one when I started my farm business. Thanks for checking in. All the best
John

Hey Guys, This is actually me Johns. I could not remember my old password so when I started my farm business I created this account. So without sounding winded. Contact me at jstasierowski@yahoo.com if interested in the control sticks. I will try to post some photos soon so you can see. The bearing ...