JDcrawlers Messageboard

thanks for the info

Can anyone tell me if a jd 1010 is positive or negitive ground

ron in coudy wrote:if Lavoy doesn't have a head, try tamcar tractor parts in Stow NY. e-mail me and I can give you the #. I got one through them, completely redone

thanks for the reply, i will check with both and go from there

I have a jd1010 gaser and Im looking for a head for it also a distribator. any help would be great

I have what I was told was a model 624 manual blade on my 1010, Im looking for someone that can send or e mail me the parts diagram and #s, I have a leaky hyd cylinder which I want to replace the seals and packing in.

silerra

looking for a good bull gear for a jd1010, 56 tooth 13 1/4" dia, 6 axel shaft spline, if anyone can help please resond or call me at 248-867-4536

Rock

LOOKING FOR 1 IF NOT 2 DRIVE SPROCKETS FOR A JD 1010 IF ANYONE CAN HELP PLEASE REPLY OR CALL ME AT 248-867-4536

Rock

I m working a a 1010 myself and this is just a thought but was the spring in the tube at the pinion end ?

problem fixed, clutch drum and disc just needed cleaned up after setting for a long time, clutch plates and disc were binding up in the drum causing it to slip.

Rock

I just replaced the clutchs,plates,presure plate and all bearings on the right side of my 1010. the presure plate was calapsed and that was the reason for the tear down. its all back together and working fine (right side) now when I brake the right side the left side does not drive like it should, s...

Can you tell me the proper adjustment for the steer clutchs on a 1010 and the proper why to do it. do I need a specil tool or is it done with feeler gauges ??

Rock

HOW DO YOU TELL IF A BRAKE DRUMON A 1010 NEEDS REPLACED.MINE IS NOT WORN EVEN ACROSS THE FACE. DO I NEED TO REPLACE IT OR IS IT NO BIG DEAL.

ROCK

Lavoy

I just wanted to say thanks for such a great site you have here.havent been a member long but so far I think it is a great site.people on here have been real nice to deal with.

Rock

thanks to you too Jim, I have it all apart now, wasnt as bad as i thought tearing it down. now just finding the part to put it back together. I will be more than happy to talk with you.send me a email and i will be more than happy to give you my number. Rock

thanks for the info Bret, I found a owners and a parts manual on ebay but still looking for service manual, thanks again