Search found 11 matches
- Sun Aug 25, 2013 3:59 pm
- Forum: Early model JD crawler technical support
- Topic: Float level
- Replies: 1
- Views: 2049
Float level
I am having a friend clean and adj the carb on my model 40 crawler. Does anyone know what the float level adjustment is. Thanks
- Thu Aug 23, 2012 8:26 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
Guess Lavoy and I need to talk turkey about prices. The crawler "works" now but it could easily leave me sittin somewhere and I can see Lavoy being right about one old one new. Also it would be alot easier to drive if it worked properly. Other than the guage for setting the clutch up is there any ot...
- Wed Aug 22, 2012 7:30 pm
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
Yup Found out what some of whatever is hitting. Just took off inspection plate and looked - the linkage for the foot brake let go, got grabbed and now has a 180% bend in it. It is the rod that runs down the back side of the final drive connecting the rocker arm at the top to the rod that runs out to...
- Wed Aug 22, 2012 2:01 pm
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
- Wed Aug 22, 2012 8:56 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
Thank you folks, U are rock stars. Checking that soon. I'm going to attempt to post some photos. Im slightly more inept at computers even than rusty crawlers but fear and common seldom stop me. OK - just looked into posting images and fear and common sense told me to wait for the wife to help. She's...
- Fri Aug 17, 2012 4:07 pm
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
40 C
Lavoy
The pins are in already must be the control valve setup.
Cam
The pins are in already must be the control valve setup.
Cam
- Fri Aug 17, 2012 9:56 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
Lavoy
Thank you Lavoy,
U gave me something to go on. I will check out the pins etc. How do I check the setting on the hyd to see if in float or not?
Cam
U gave me something to go on. I will check out the pins etc. How do I check the setting on the hyd to see if in float or not?
Cam
- Fri Aug 17, 2012 9:25 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
downpressure
Sorry Hydro
Called u Howard - is your blade the same configuration as mine?
Called u Howard - is your blade the same configuration as mine?
- Fri Aug 17, 2012 9:19 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
down pressure
Howard I just hear the relief valve howl as soon as it hits the ground so never tried to hold it. It is full of fluid but I havn't tried to bleed the rams in case they have air in them. Didn't think they did because they don't "chatter". The blade configuration is on the outside of the tracks (the a...
- Fri Aug 17, 2012 8:35 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
down pressure
Hi Howard
Doesn't seem to have any downpressure other than wt of blade. I could send pictures if you can explain how. Oh hang on I see the insert image button now - I could get the wife to download a couple of pics.
I live near Calgary Alberta Canada.
Cam
Doesn't seem to have any downpressure other than wt of blade. I could send pictures if you can explain how. Oh hang on I see the insert image button now - I could get the wife to download a couple of pics.
I live near Calgary Alberta Canada.
Cam
- Thu Aug 16, 2012 9:19 am
- Forum: Early model JD crawler technical support
- Topic: advice on Gramps 40c
- Replies: 19
- Views: 14169
advice on Gramps 40c
Hi Recently got 1953 3 roller 40c going again. Whahoooo! Had some issues like stuck clutch's, brakes etc. But I dont know where the manual is and need some advice. I got the clutches free by filling the finals with water and toilet bowl cleaner - old guy told me that is what he used to use on siezed...