Search found 14 matches
- Thu Oct 10, 2013 10:22 am
- Forum: Early model JD crawler technical support
- Topic: 1010 crawler loader oil question - reverser, transmission
- Replies: 5
- Views: 5951
- Thu Oct 10, 2013 5:07 am
- Forum: Early model JD crawler technical support
- Topic: 1010 crawler loader oil question - reverser, transmission
- Replies: 5
- Views: 5951
1010 crawler loader oil question - reverser, transmission
I was going through my oil levels and the reverser is down a bit. What should I use? The guy I bought the machine from said I should use hydraulic fluid for all. Is this true?
- Mon Sep 24, 2012 6:10 am
- Forum: Early model JD crawler technical support
- Topic: Smoke
- Replies: 8
- Views: 8198
Hi, I appreciate all of your comments and suggestions. I do not understand what you mean by the "breather cup" - I'll try to figure that out - do you mean the air cleaner bowl? As far as the dipstick is concerned, I can only assume it is original but don't know for sure. The best way to describe it ...
- Sat Sep 22, 2012 8:24 pm
- Forum: Early model JD crawler technical support
- Topic: Smoke
- Replies: 8
- Views: 8198
- Sat Sep 22, 2012 7:23 pm
- Forum: Early model JD crawler technical support
- Topic: Smoke
- Replies: 8
- Views: 8198
Smoke
Hi, I've only had my 1010c for a month or so and I've not used it that much but I have noticed that it sometimes smokes, blue, oil smoke... It isn't consistent and doesn't seem to be lacking in power as if it had a loss in compression. The only thing I have noticed is if I'm working on a hill (acros...
- Sun Sep 09, 2012 5:01 am
- Forum: Early model JD crawler technical support
- Topic: Snow and ice
- Replies: 16
- Views: 16867
- Sat Sep 08, 2012 9:56 pm
- Forum: Early model JD crawler technical support
- Topic: Snow and ice
- Replies: 16
- Views: 16867
Hi all, I appreciate all of the advice. My 1010 has street pads but does have the auxiliary holes. I will have to cut out the old bolts in there - they are warn down and rounded. They guy I bought it from said they used to be snow spikes... I appreciate the picture - seems like it would be worth the...
- Fri Sep 07, 2012 5:30 am
- Forum: Early model JD crawler technical support
- Topic: Snow and ice
- Replies: 16
- Views: 16867
Snow and ice
Hi, I am hoping to use my 1010 this winter to move snow around and clear areas for propane deliveries and parking at our home in Vermont. The driveway is very long and being Vermont, steep in places. I am concerned with the pads that are currently on the track being flat (noticed sliding on ledge in...
- Sun Sep 02, 2012 5:30 am
- Forum: Early model JD crawler technical support
- Topic: 1966 JD 1010 crawler / loader - lights - electrical
- Replies: 2
- Views: 3874
- Sat Sep 01, 2012 7:00 pm
- Forum: Early model JD crawler technical support
- Topic: 1966 JD 1010 crawler / loader - lights - electrical
- Replies: 2
- Views: 3874
1966 JD 1010 crawler / loader - lights - electrical
Hi, In getting ready for winter, I need to get some lights working on my crawler. The old lights are there but the wires are gone, I ran a new line to the lights in the grill from the switch - the generator light stayed on (makes me think there was some kind of polrization) and no lights. Or maybe t...
- Sat Sep 01, 2012 6:46 pm
- Forum: Early model JD crawler technical support
- Topic: Track Adjusters
- Replies: 8
- Views: 10398
- Thu Aug 30, 2012 8:24 pm
- Forum: Early model JD crawler technical support
- Topic: Track Adjusters
- Replies: 8
- Views: 10398
Thanks for all of the reply's. I bought Lucas heavy duty grease NLGI #2. I'm not sure about much in grease but it seems heavy and thicker more like the grease that was in the old part. Now I need to put it back together again. I didn't remove the track so I need to take the replacement apart without...
- Thu Aug 30, 2012 8:42 am
- Forum: Early model JD crawler technical support
- Topic: Track Adjusters
- Replies: 8
- Views: 10398
- Thu Aug 30, 2012 7:21 am
- Forum: Early model JD crawler technical support
- Topic: Track Adjusters
- Replies: 8
- Views: 10398
Track Adjusters
Hi, I just picked up a nice 1966 JD 1010 crawler/loader. Within the first 8 hours of "getting the feel" of the machine I was pushing some brush around in a area recently cleared and picked up a branch in the track. The branch was 4" in diameter and got between the track and the cog - stretching the ...