JDcrawlers Messageboard

i am trying to find liners for my straight 350 but deere has a serial number break on the engine the only number i can find is just above the oil filter and that is t23404t
the crawler serial # is 016190t

im trying to find new teeth for my 450b's drott bucket deeres parts catalog shows they are different than the normal bucket but will they work if not does any one know where i could i find 7 new ones thanks for any advise

i have a power 6 way blade on my 350 and i have noticed when i use the 6th function the blade will go down farther if i lean it to the left side then the right side i know the cylinder is moving full stroke and not binding and the arrows are about 2 inches off from each other when the blade is level...

well i got the pin out and the frame rail off got one bolt out of the "bushing " with the easy out had to drill the other one out and tap it to 3/4 now my issue im having is that i can see the 2 bolt holes on the rt side bell housing are obliged i have been told its alright to go one size bigger hav...

well today i got the blade off along with the nose but i was having some trouble on getting the pin out of the blade frame /mount part #U13798 its the pin in the back by the sprocket with a hole through it. http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServle...

i have just bought a 350 dozer it had a problem with engine oil leaking when it was sitting so i pulled the belly pans and found the oil pan rusted from having so much dirt in the belly pans fixed the pan and while i was under the machine i found 2 bolts on each side broke that tie part # T21249 bus...