JDcrawlers Messageboard

The tank heaters work well, but if temps are cold and the oil is thick cranking speed will hinder starting, A oil heating pad 100W applied with some ultra copper RTV will thin things up on the lower end. Think mine is 150W but its a little colder in my neck of the woods. The unit marris posted pics ...

The advance is in correctly then, The adjustable parts faceing out and the hydraulic piston towards the block. I will open the charge pump end and double check that. Not sure about the relief valve for fuel maris I did have some extra parts from the kit. If something is blown out might need more ins...

The charge pump ring as I recal has no arrow but does have a C on one side and a CC on the other. I will try and check the charge pump as a place to start this weekend.

http://www.flickr.com/photos/89644600@N08/8149519514/in/photostream Working conditions http://www.flickr.com/photos/89644600@N08/8149518676/in/photostream Pump ###'s http://www.flickr.com/photos/89644600@N08/8149518186/in/photostream Pump after rebuild Yes with the line relieved fuel spewing same re...

Hmm trying to add some pics, Thought I could cut and paste?

I have a 350BE dozer, last summer it developed the classic problem. It would start and run when cold but within 5min would slow and then stall. Reading posts on the site(thanks to all) I placed an order for a replacement govner and a "rebuild kit" (bunch of o rings) for my IJ pump. I have the Roosam...