Search found 363 matches
- Sun Jun 22, 2014 5:12 am
- Forum: Late model JD crawler technical support
- Topic: Help with cylinder rebuild kits
- Replies: 4
- Views: 3756
cylinder kits
not sure where you live I am in MI there is a company called Martin Fluid power they handle all kinds of hydraulic seals I take them the samples they match up very reasonable have also used EBAY I also buy individual seal from Jd if you have part numbers lots less cost that way usually i just change...
- Sun May 11, 2014 5:20 am
- Forum: Late model JD crawler technical support
- Topic: ran out of fuel in '81 450 c
- Replies: 12
- Views: 12043
- Sun May 04, 2014 5:51 am
- Forum: Late model JD crawler technical support
- Topic: roosa master db
- Replies: 1
- Views: 2195
- Sat May 03, 2014 5:58 pm
- Forum: Late model JD crawler technical support
- Topic: roosa master db
- Replies: 1
- Views: 2195
roosa master db
would any one know the parts manual number for the db injector pump used on JD three cylinder engines ?
JIM
JIM
- Mon Apr 14, 2014 3:50 pm
- Forum: Late model JD crawler technical support
- Topic: 350 Hydraulic Hose
- Replies: 7
- Views: 6118
Parts book for blade
If you go to JD parts web site enter 6305 in model search it will get you to the parts brake down for your 350 dozer or check out E Bay for a paper copy. the lines were steel and ran in the right side originally .looked on E Bay
2 available around 20.00.
Good luck JIM
2 available around 20.00.
Good luck JIM
- Sun Apr 13, 2014 6:01 am
- Forum: Late model JD crawler technical support
- Topic: JD 350D Steering Issue
- Replies: 1
- Views: 2573
- Mon Apr 07, 2014 6:07 am
- Forum: Late model JD crawler technical support
- Topic: Botton rollers
- Replies: 3
- Views: 4748
roller replacement
recently replaced a few rollers on my 350 with tracks on I used a floor jack and made a u shaped extension cradle to support the roller worked fine if you slide tracks out a floor will work fine.was necessary to remove rock guards and Idid not replace them .
JIM
JIM
- Mon Mar 03, 2014 8:02 am
- Forum: Late model JD crawler technical support
- Topic: New to me dozer pics and Questions...
- Replies: 5
- Views: 5684
sprocket guards
Nice looking 350 looks like a good buy. I have a set of sprocket guards off a350 for sale 50.00 each if you are interested .jim
- Mon Feb 10, 2014 7:21 am
- Forum: Late model JD crawler technical support
- Topic: JD350B General Questions
- Replies: 45
- Views: 28315
- Sun Feb 09, 2014 6:14 am
- Forum: Late model JD crawler technical support
- Topic: JD350B General Questions
- Replies: 45
- Views: 28315
- Wed Feb 05, 2014 12:43 am
- Forum: Late model JD crawler technical support
- Topic: transmission to reverser bolts JD350
- Replies: 2
- Views: 2794
- Tue Feb 04, 2014 6:43 am
- Forum: Late model JD crawler technical support
- Topic: whatchamacallit type electrical connector
- Replies: 21
- Views: 15276
- Mon Jan 27, 2014 4:08 pm
- Forum: Late model JD crawler technical support
- Topic: New to me 450 loader ?'s
- Replies: 25
- Views: 18131
water pump
I have a350 dozer and have the pulled water pump off without removing nose piece replaced seal and put back together this a dozer not a loader.Its tight a job .My manual also says tilt nose forward and remove radiator just did it this spring when I changed my fan back to the blower one.
JIM
JIM
- Sat Jan 25, 2014 7:13 am
- Forum: Late model JD crawler technical support
- Topic: JD350B General Questions
- Replies: 45
- Views: 28315
350
I have the same machine definitely 350 not B Lavoy says only difference is location of reverser lever have you ran it make sure it steers well steering clutch replacement is a big job and expense
JIM
JIM
- Tue Jan 14, 2014 5:07 am
- Forum: Late model JD crawler technical support
- Topic: parallel snap ring pliers
- Replies: 6
- Views: 5168