Search found 346 matches

by jsal
Mon Apr 05, 2021 3:34 am
Forum: Late model JD crawler technical support
Topic: JD450 boom decay
Replies: 3
Views: 135

Re: JD450 boom decay

sounds like your packing on your cylinbers are wasted need to take lift cylinders off and rebuild JIM
by jsal
Wed Mar 31, 2021 4:29 am
Forum: Late model JD crawler technical support
Topic: Straight 350 filters
Replies: 2
Views: 115

Re: Straight 350 filters

I have found that theJD filters are cheaper than those that you stated also certified heavy truck mechanic now retired !! Jim
by jsal
Thu Feb 18, 2021 8:27 am
Forum: Late model JD crawler technical support
Topic: 350 Injector Removal
Replies: 5
Views: 998

Re: 350 Injector Removal

there is a small slide hammer that I bought to remove pencil injectors because the first set I took of my 66 350 I ended up destroying the injectors using pry bars believe I purchased on Amazon OTC also makes one much easier

JIM
by jsal
Sun Jan 31, 2021 4:55 am
Forum: Late model JD crawler technical support
Topic: What year is my 350
Replies: 5
Views: 1059

Re: What year is my 350

have one same series mine is a 66
by jsal
Thu Jan 14, 2021 5:07 am
Forum: Late model JD crawler technical support
Topic: 1965 straight JD crawler help
Replies: 14
Views: 1949

Re: 1965 straight JD crawler help

I have the same series dozer check all of your fluids as no fluid no movement JIM
by jsal
Wed Jan 13, 2021 4:39 pm
Forum: Late model JD crawler technical support
Topic: 1972 450B
Replies: 6
Views: 1164

Re: 1972 450B

first check all your fluid levels if no oil no move !!!!!
JIM
by jsal
Wed Nov 25, 2020 4:01 am
Forum: Late model JD crawler technical support
Topic: 450c blade repair
Replies: 7
Views: 1421

Re: 450c blade repair

had same problem on same dozer I turned plates over so you have a new surface and welded
3/16 steel on blade also made up some shims made it a lot tighter JIM
by jsal
Thu Nov 05, 2020 12:18 pm
Forum: Late model JD crawler technical support
Topic: 4000 Winch Weldco-Beales MFG Arch
Replies: 4
Views: 613

Re: 4000 Winch Weldco-Beales MFG Arch

heating them red hot then letting cool on there own heat is a lot better than any penetrating oil have used on frozen parts in the past with good results

JIM
by jsal
Sun Oct 18, 2020 6:55 pm
Forum: Late model JD crawler technical support
Topic: JD 450 tune up (Euro Market)
Replies: 55
Views: 5849

Re: JD 450 tune up (Euro Market)

might need to do a compression test if you need to start with starting fluid just had 3 cyl Deere would not start with starter fluid checked low compression turned out to be pited exhaust valves
by jsal
Tue Oct 06, 2020 5:01 am
Forum: Late model JD crawler technical support
Topic: Trans-reverser joiner-stud snap :( how the F...
Replies: 8
Views: 1035

Re: Trans-reverser joiner-stud snap :( how the F...

if you do take it apart make sure to put new splined coupling in
by jsal
Mon Oct 05, 2020 3:17 am
Forum: Late model JD crawler technical support
Topic: Trans-reverser joiner-stud snap :( how the F...
Replies: 8
Views: 1035

Re: Trans-reverser joiner-stud snap :( how the F...

had same situation was able to remove with Milwaukee angle drill and a lot of patients

jim
by jsal
Wed Sep 16, 2020 6:21 am
Forum: Late model JD crawler technical support
Topic: 450D Broken Bolts in Mounting Frame and Cross Bar
Replies: 4
Views: 887

Re: 450D Broken Bolts in Mounting Frame and Cross Bar

I would use a rose bud torch to completly heat red let cool on its own might have enough out to turn out with pipe wrench or weld nuts on after heating
by jsal
Tue Sep 08, 2020 11:16 am
Forum: Late model JD crawler technical support
Topic: 450C rollers
Replies: 12
Views: 2106

Re: 450C rollers

Good !!
by jsal
Mon Sep 07, 2020 10:07 am
Forum: Late model JD crawler technical support
Topic: 450C rollers
Replies: 12
Views: 2106

Re: 450C rollers

have two used lower and one new berco support roller in Armada MI

JIM
by jsal
Wed Sep 02, 2020 4:31 pm
Forum: Late model JD crawler technical support
Topic: Model Identifacation and part number for cylinder seal kit
Replies: 5
Views: 1057

Re: Model Identifacation and part number for cylinder seal kit

when I do the cylinders on my john deere equipment i replace what is needed to stop the leak which is the rod packing seals wiper seal packing gland o- ring and backup usually buy direct from JD 75.00 if you buy the seat kit from deere 231.00 just what I have done in the past and works for me and sa...