JDcrawlers Messageboard

any one looking to buy a 49 mc ? email me for info!! thank's Dave

Thank's for all the info, we'll give it a try!!

seem's I have to adjust the left band brake on the Mc but can't get on it, linkage is in the way, do I have to pull the f-drive off ?

Merry Chrismas to everyone !! I went up to my camp in vermont last friday, fired the old MC up and played in the snow ( 4'') wet & heavy, the hyd's were real slow,so I checked the hyd oil ,that's ok , in back of the gen someone put a peice of heater hose on the suction line to the pump, real nice, f...

Hello to all of you out there, I live in MA , but my mc crawler is at my camp in vermont , I would like to know if there is any one around up here in north east at has a mc too, would like to check out machine ,part's , and info.

Thank's Dave

Thank's for the info, I'll check to see how far down in the tank the line is,then piece it together. have great day (if you can)

HI, I'm looking for a hyd line for a mc , from the hyd tank to the pump,the parts man. # is key#9--part#m1346t Thank's Dave

Hello everyone, hope all of you had a great turkey day,

I found out why the hyd sys is slow, the suction side is resricted,someone used a rubber line off the pump, half kinked and at the tank end the nut is tight but line is'nt, should this be a one piese line?

I'm still waiting for the manual, what should the pressure relief be set at?

thank you for the info, I think this was a steel for 1500.00, the hyd's are slow, I think the psi is only 600 , it's hard to grade with,he use hyd oil,sould I use motor oil?


Dave Auger

run's great,had to back off the trac sdjuster's ,the man I bought it from just had new pin's & bushing done last year and had not driven it much,so I drove in around a bit and they did not loosing up, started to check up on it ,they had all the spring's cranked up so tight it would not even roll, so...