JDcrawlers Messageboard

THANKS #INJECTOR WAS BAD

I HAVE A 350B ENGINE RUNS GOOD AT IDLE BUT AS RPM INCREASE OR UNDER A LOAD IT HAS A MISS FROM TIME TO TIME AND A SMALL AMOUNT OF WHITE SMOKE COMES FROM EXHAUST I HAVE JUST REPLACED THE HEAD GASKET IT HAS NEW INJECTORS I REPLACED THE FUEL FILTERS ABOUT 8 WEEKS AGO REPLACED FUEL SHUT OFF AND LINE FROM...

I WAS JUST DEBATING IF I HAVE A SPRING ISSUE OR FLYWHEEL I HAVE HAD THIS CRAWLER FOR ABOUT 8 MONTHS UPON STARTING THE MACHINE I GET A RATTLE IN THE AREA OF WHERE THE ENGINE AND TRANSMISSION CONNECT IT STOPS AS SOON AS ENGINE FIRES AND RPM GO UP AT IDLE IS FINE ITS JUST AT START UP DONE FROM FIRST DA...

replaced head gasket fixed issue beware of the gasket that comes with a rebuild kit . thanks for all the help..............

Thanks i have ordered a gasket will check and replace this weekend . the head was reworked at a highly regarded shop . but i am not rule anything out will go over good and report back,

and engine runs good plenty of power

it freezes here now and then we run a 50/50 mix . i forgot to say this is a newly rebuilt engine.

I have a 350b notice water coming from overflow tube on radiator took cap off and water was came out of opening like it had pressure even when cap was off engine was cold changed thermostat no change no water in oil , any ideas on whats going on thanks in advance.

THANKS I PURCHASED A BUTTON FITTING FOR MY HAND PUMP GREASE GUN WORKS GREAT THANKS TO EVERYONE,

ANYONE KNOW ABOUT THE SPECIAL GREASE GUN TO LUBE THE ROLLERS AND VERACIOUS FITTINGS ON MACHINE ARE THEY AVAILABLE . THANKS