Search found 620 matches

by dtoots1
Mon Jun 17, 2019 5:58 pm
Forum: Early model JD crawler technical support
Topic: New - Just bought a JD 430
Replies: 6
Views: 76

Re: New - Just bought a JD 430

i have jd440ic and i do have an inline filter on mine, these old machines just don't have the room to put filter n a 'good' place, mine works great keeping the loose rust out of the carb, have had it on now for a couple or3 years and 'do not have' a fuel flow problem. it is the cheapest and smallest...
by dtoots1
Sat Jun 08, 2019 10:25 pm
Forum: Show & Tell
Topic: My first crawler. 350b
Replies: 5
Views: 127

Re: My first crawler. 350b

beautiful machine!!!!
welcome.
helps if you add location to your profile..
by dtoots1
Fri Jun 07, 2019 8:05 am
Forum: Show & Tell
Topic: 440IC with 602 Blade and Winch
Replies: 19
Views: 1078

Re: 440IC with 602 Blade and Winch

ok guys, I got a question about his left steering brake casing....I have jd440 ic also....and my bung hole and cover is on the front side of the housing, i notice his is showing up on the rear side and the donor i had from a loader was the same as mine.....what is different, could that be off a 350 ...
by dtoots1
Mon Jun 03, 2019 12:24 pm
Forum: Early model JD crawler technical support
Topic: 1959 440 ICD - How to get it running?
Replies: 10
Views: 237

Re: 1959 440 ICD - How to get it running?

first thing you need to do..is add your location to your profile..someone may be close by to help. will probably need to drain and clean the fuel tank unless the tank is near full there will be loose rust and other stuff in it. will need to find out what size battery whether 6volt or 12 volt. if 6 v...
by dtoots1
Mon Jun 03, 2019 6:54 am
Forum: Off-topic discussions
Topic: thinking newer truck
Replies: 40
Views: 6345

Re: thinking newer truck

re..floating axle..

Well Stan,
thanks for that info!! Just checked and my sons f250 heavy duty does have the full floating axle, so that is a relief and will be using it to get that down the road. Thanks to all for feedback
by dtoots1
Sun Jun 02, 2019 8:48 am
Forum: Off-topic discussions
Topic: thinking newer truck
Replies: 40
Views: 6345

Re: thinking newer truck

so to clarify...full floating rear axles....fordf250 heavy duty 2013...would that have floating axle and how do you tell or find out?? missed it and bought 9000 gvwr camper, looked like 5000 gvwr in poor light..pull behind and need to pull it 500 miles, don't think i want to pull with my half ton, s...
by dtoots1
Sat Jun 01, 2019 7:10 pm
Forum: Early model JD crawler technical support
Topic: 440i question
Replies: 14
Views: 905

Re: 440i question

Not sure of interchangeability of reverser from 440ic loader reverser to your wheeled, i do have a donor one on hand that seems to function if you would want to test it, i know it snaps very well, just don't know what the clutches are like in it. Have been saving it to use on my jd440ic, cause mine ...
by dtoots1
Sat Jun 01, 2019 6:44 pm
Forum: Early model JD crawler technical support
Topic: 440i question
Replies: 14
Views: 905

Re: 440i question

That would indicate reverser rebuild...front half worn, though you mite try adjusting the front clutch..also check fluid level see if low.. Though you state put reverser in reverse and put in reverse(tranny???) ..reverse an reverse would be forward movement..what does it do in forward gear in tranny...
by dtoots1
Fri May 31, 2019 7:40 am
Forum: Show & Tell
Topic: 440IC with 602 Blade and Winch
Replies: 19
Views: 1078

Re: 440IC with 602 Blade and Winch

Bent, There were a lot of pics lost from that site once they started charging for use of their site....way too many of them....thats why we got the "dedicated pic server" set up for the crawler site.....you need to email Lavoy to advise him your chosen login and password for the pic server and read ...
by dtoots1
Thu May 30, 2019 2:30 pm
Forum: Show & Tell
Topic: 440IC with 602 Blade and Winch
Replies: 19
Views: 1078

Re: 440IC with 602 Blade and Winch

Bent, pics are not really too big to load..they do take up your page though...i cannot seem to find where you uploaded them in the "dedicated pic server" if not there how are you loading them? Pic server formula needs that /normal/ typed in the code to keep it a bit smaller..actually is a way to hav...
by dtoots1
Sun May 26, 2019 8:23 am
Forum: Off-topic discussions
Topic: What is the most useless tool you ever bought?
Replies: 4
Views: 508

Re: What is the most useless tool you ever bought?

How about harbor freights chain saw sharpener? any luck with that???? tried it couple times, looks good put on saw and dam thing cuts crooked...i can use hand file and do better and i can't hand file for crap..easier to go buy new chain....!!
by dtoots1
Sun May 26, 2019 8:15 am
Forum: Show & Tell
Topic: 440IC with 602 Blade and Winch
Replies: 19
Views: 1078

Re: 440IC with 602 Blade and Winch

for your picture size, read all info in the "Question & Answer forum" at the bottom of the board index page....in there you will find that the hyperlink for the picture in the "dedicated pic server", needs to have the word normal with the exact placement as shown. this makes the pics a bit smaller. ...
by dtoots1
Sun May 26, 2019 7:59 am
Forum: Early model JD crawler technical support
Topic: 420c 5 roller undercarriage specifications
Replies: 15
Views: 1363

Re: 420c 5 roller undercarriage specifications

my jd440ic steering brake kinda acted like that, just afterihad adjusted them, went back and re-adjusted and have been fine since. actually bogged down the engine, though track did not lock up like yours. they seem kinda finicky and want adjusted exactly in order as per book
by dtoots1
Thu May 23, 2019 10:31 am
Forum: Late model JD crawler technical support
Topic: Tilting Hard nose on 450c dozer
Replies: 5
Views: 701

Re: Tilting Hard nose on 450c dozer

newguy,
edit your profile for your location..
by dtoots1
Tue May 21, 2019 10:52 am
Forum: Early model JD crawler technical support
Topic: Videos
Replies: 8
Views: 924

Re: Videos

try https://youtu.be/5RrUQGWiJu4 ....on cell phone...dang laptop pulls error use upper and lower case

JUST TRIED IT ON LAPTOP AND IS CORRECT AS WORKS ON CELL BUT NOT LAPTOP...crap