Search found 1134 matches

by dtoots1
Thu Mar 14, 2024 2:06 pm
Forum: Early model JD crawler technical support
Topic: Single or Double hydraulic system?
Replies: 21
Views: 14643

Re: Single or Double hydraulic system?

Regards valve controls etc...my engine should be ready this week or maybe next..once i get it back i will find out just what my hydraulic system will need to get it to work....so far i have not had a chance to even see...it is NLA and is front loader w/scarifier which actually is mechanical and NOT ...
by dtoots1
Thu Mar 07, 2024 10:27 am
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics..engine info

Well latest info...shop tells me w/pic..my crank bearings need replaced..all that coolant sure did number on them..so more costs, tho better now than later!!..more hurry n wait...once we get to finish i will add up total costs and post and see if can get more pics posted..Thanks to our pic-server pr...
by dtoots1
Thu Mar 07, 2024 10:13 am
Forum: Late model JD crawler technical support
Topic: 350 blade arms packed solid with mud/debris
Replies: 3
Views: 163

Re: 350 blade arms packed solid with mud/debris

General info...Also tis good idea to clean up, w/ power washer after every use...frozen will not help..
by dtoots1
Mon Mar 04, 2024 11:13 am
Forum: Late model JD crawler technical support
Topic: John deere 350b only cuts one way
Replies: 15
Views: 434

Re: John deere 350b only cuts one way

A note...Lavoy does have available all or MOST parts needed for these machines and stands behind them..and provides this site..which we support with ordering his parts, that far outperform any FLYBAYs
by dtoots1
Thu Feb 29, 2024 3:05 pm
Forum: Late model JD crawler technical support
Topic: John deere 350b only cuts one way
Replies: 15
Views: 434

Re: John deere 350b only cuts one way

Then would appear to be adjustment problem...unless something came undone or not accomplished????

need more info
by dtoots1
Wed Feb 21, 2024 1:28 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics

Regards...My jd420 ring gear for flywheel...My shop simply heated her up with rosebud torch slipped it off and flipped it over to all new surfaces....like new now..no dead zones ..if they even were..
by dtoots1
Wed Feb 21, 2024 11:11 am
Forum: Off-topic discussions
Topic: BIRTHDAYS
Replies: 0
Views: 268

BIRTHDAYS

Well so much for smart computer systems...WHERE is my birthday??? machine must have C>R>S>

OOOPS wasnt there when I first looked!!...Must need to sign in to jog its memory?
by dtoots1
Tue Feb 20, 2024 11:08 am
Forum: Off-topic discussions
Topic: pic server DOWN
Replies: 9
Views: 6542

Re: pic server DOWN

WOW!!!!


and welcome back
...Glad we can resume some normal function...ifn i can even remember how to upload again...I will have to read my INSTRUCTIONS oncet again!!!
by dtoots1
Mon Feb 12, 2024 11:24 am
Forum: Late model JD crawler technical support
Topic: 450 C Not Starting but runs on ether when sprayed
Replies: 8
Views: 444

Re: 450 C Not Starting but runs on ether when sprayed

NikinNZ,

review search... posts re..mouse turds and pelletane gasket..whole lot of stories and good info
by dtoots1
Sun Feb 04, 2024 4:09 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics

Just a note to add.. The 4 large bolts that hold the bell housing to the side flanges....are really a P.I.A. to get all of them lined up...the 2 top ones with the centering washers really need installed first....with the centering flange inside the hole and the 4 back at tranny need loosened just a ...
by dtoots1
Sat Feb 03, 2024 10:29 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics..continuing saga

Well Folks, Yup was able to leave fuel tank, dashboard etc. on center housing and move it out enough to locate my spring and cotter key...hooked sleeve and cotter key and bent it over...now it cant spin out....Used my engine hoist...had to put trailer hitch in end of lift to extend enough to get clo...
by dtoots1
Sun Jan 28, 2024 1:37 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics..420 saga continues

Well Guys and Gals, We continue with this recalcitrant booger....number one cylinder is cracked...so will get shop to put sleeve in it....once they go thru everything else to see what else..... NOw when i pulled engine...my entire long driveshaft pulled out...left the spring in the sleeve...so i get...
by dtoots1
Fri Jan 19, 2024 3:05 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics..420 engine

Lavoy,

Yes head was done complete...and valve job..will have engine magnafluxed....text me price on yours.engine so i know what looking at..will find out what mech. shop reveals
by dtoots1
Thu Jan 18, 2024 7:31 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics

copper spray was used..

anyone with possible used 420 engine, if i need blamrd thing?
by dtoots1
Sat Jan 13, 2024 12:23 pm
Forum: Early model JD crawler technical support
Topic: jd420 pics
Replies: 129
Views: 507568

Re: jd420 pics..engine problem

Well Dag Nab It!! Still getting water in oil...so back to drawing board....engine will go to shop and find problem..magnaflux the dang thing and go from there.... Just in case....anyone have a good 420 engine nearby hereabouts??? Shoulda kept my old 440 spare engine, bell housing and reverser to at ...